Search results for query: *

So I removed the door hinges on my 70 polara convertible due to the driver door sagging. Well it appears the bottom hinges are fine, but the top on the drivers is visably worn and the passenger side is not far behind. Are there any rebuild kits out there for the top hinges? Or what are my...

So my issues resides in a 70 Polara. It has a stock rebuild 440 running an AVS 4640SA carb that was rebuilt. Timing settings are 8 deg BTDC with an idle speed of 800-850 rpm pulling about 13 inHg at idle. I initially had the initial set at 12 BDTC but would ping at moderate to heavy...

Hello Folks, I am having a tuning issue on a 70 polara and I think the issue is carb related. My guess is either the springs for the rods are too light or I have a vacuum leak. Here are the details: The car is a 70 polara convertible with a 440, 727, and 3.23 suregrip. The engine was rebuilt...

So I have a 70 Polara with a tilt column. From what I heard in the past the straight columns were mopar where as the tilt columns were from GM (again, not to sure how true this is). But anyway, I was wondering if anyone knew what connector type was used on these columns? I know most of the...

I have a 400 2 barrel that came out of a 73 imperial. I believe it was taken out in the 70's/80's and sat around ever since. When I initially got it I was not able to rotate it a full 360 degrees. I tried removing parts off of it to see if I could get it to spin but was not able to get it to...

Hello Folks, I was hoping to get some insight on the location of the super lite switch. This car did not have the super lite initially, but the old man wanted to put one in. Well he found the bracket, light and grille and it was installed. I have the switch, but not entirely sure where...

Hello, Would there be any interest in a rebuild-able heater control valve? I have a 70 Polara that I would like to take on a road trip to the beach one day and my old man was always hesitant on taking that car to far from home due to the heater control valve and its proneness to cracking...

Hello, I am working on an Abody that now uses a Federal Power steering pump. However unknown to me was that the pulley was different between a big block and small block pump. Well I have the big block pump brackets, but have the small block pulley. I am looking for a big block federal...

Hello All, I am looking for some trim. My Dad has a 70 Polara convertible that he finally finished obtaining all of the super-lite components. However the grill does not have the stainless steel trim that outlines the perimeter. I was hoping someone on here would have a spare left grill...