Search results for query: *

Went to MACAN for the first time, very compact for the number of cars shown. Some snaps:

I think the DMT heater box rebuild kit includes foam seals for the defroster door. I think because the shop that did work on my car did a halfa$$ job on the heater box. When you hand actuate the door from closed (first pic) to open (secon pic) there is about a quarter inch of travel and it does...

1) I would like to bench test the actuators on my 69 Plymouth Fury with AC. Can this be done without breaking the bank buying a vacum pump and the minimal gauge set up. The test procedure requires 8 inches of vacum. Rebuilding my box during to the shops lack of testing and cleaning the...

Today, was the day to check the heater box heater and condenser. Unfortunately the shop did not clean either. Off to the radiator shop for cleaning and pressure testing. In addition either ma mopar, a servicing in the past or more likely the shop that had the car finished or destroyed the heater...

Want to move and test the motor that actuates the regulator attached to the tailgate window. 12v battery battery, negative lead attached to the regulator frame/ sub- assembly. Positive lead connected to one of the two needs from the motor. One lead up the other lead down? Thanks

If my memory serves me and the difficulty in getting a piece of glass out in the yard last week. This assembly slips in from the outside of the window frame. The body type is a wagon which is the same door as the sedan. The vent wing, front guide for the door glass and the glass go in as an...

Out picking a undamaged wheel housing and screws to attac the windows to the operators. (Hope i have the channels that attach to the windows, thought of this yesterday on the way back). While browsing the donors, I keep an eye out. One was in the back seat, the other buried under a whole lot of...

Not sure why this one survived off of a folder but it did. Had Cherry Bomb one as well. Digging for another thing and found this.

I seem to remember three fastnets to hold the cast extensions on. The body has two on the bottom, used an inspection mirror with no proof of a third from the back, where there is a mounting hole. Anyone have pics or ? Yes the bolts will get a puff of body color paint.

1969 Plymouth, Custom Fury 2bbl 383. Two brackets. One I powdered coated, thinking it was the battery tray brace, it isn't. Battery tray brace is "L" shapped; inverted when installed. The other bracket was painted by the "shop". Went through the assembly manual, and the parts book. Hive thoughts?

Hive suggestions on who to purchase new lug nuts for stock steel rims with dog dish hub caps. On Monday it was brought to my attention there are a couple of lug nuts on each rim. Just one more issue with the shop that had my car. I have sifted through half tge posts on lug nuts when searched

Been sorting hardware in more detail getting ready to finally put the front end together. I've collected the proper thinck and thin shims. 1. What determines the number of thick and thin U shims on the drivers and passenger side? 2. Could any members take a measurement from the top of the metal...

A couple of the hone team

The hardware along the top edge along the bottom edge of the windshield are 18-8 sheetmetal screws that are zinc coated? The base or bottom is bolted to the drivers and passenger side using 1/4‐20 x ? What length, that have what type of finish zinc coating or ?. Body assembly manuel has given...

Traveling to Winston-Salem NC, made time to stop at FuryGt's home for way-ward Plymouths. Picked up a nice 69 wheel opening trim piece and a couple of other pieces of brick a brack for my wagon. Nice after noon with a good dose of hospitality. Finished off with a ride in the Sport Fury. Thanks...

Any thoughts of attending?

Relatively new auto museum, on Chicago's NW side. Great parking, just off the expressway. A surprising large collection, including brass Era to contemporary cars. Including some of our favorite brands. Eight galleries the size of the last photo. The name sake made his money in dry cleaning and...

Think I found the way through the bucket of hardware hell. Use the assembly drawings enlarged to 18 x 24" with clear printed labels with the size and part number and a bin number? The drawing has a circle containing a reference number and letter. That references a part, type and torque. Keep in...

The shop that had my car a 1969 Plymouth Fury Wagon; did me no favors. Concerning sorting and labeling where things came from when they bagged the parts. I'm getting ready to attach the front fender wheelhouses, and fenders. The "1969-70 Body Assembly Manual" specifies three different 1/4-20...

Needed to do some car maintanence on other cars. Found a gimmickey thing called a Oil udder, slips over the outside of the oil filter and acts as a funnel. Made the messy part much better. Three sizes, well worth the money