Search results for query: *

My trans chattered going into reverse so I took a crack at adjusting the bands and even played with the pressure. It didn't resolve the issue completely but adding Lucas trans additive did. A few thousand miles later it's been good. There's a 125k on it...

I went with the stear & gear modern feel unit on my '77. There's still an inch or 2 play. 35 mph range lots of correcting not so much at highway speeds. Need things like lower control arm bushings and running old Cooper white walls so there's a not a lot going for it. I don't have a benchmark...

The best I can get is one chirp and then if I wait a minute or 2, another. Horns work, the steering wheel switches are gnarly but I did get the one that didn't work to work. The new duralast relay doesn't work at all so next would be to try another OEM or some switches if any come up but one...

Will do...

I tried a different relay, supposedly NOS from ebay and no dice. I thought I heard some sort of a squelch sound coming from it a time or two but not sure. It's a one done type thing. I was hoping it would be something easy...

Oh ya, Duh.... I tested the relay putting a battery charger on the spades until I got a click. 'B' & 'H' seemed to do it. Then I took the cover off and it looks brand new inside. I have the factory electrical manual and like most things it doesn't go into much detail. All it tells you to do is...

I have power to the relay block and put 12v to the relay tabs and hear the click. What does the roller on the turn signal switch do...???

My horn died a slow death with one spoke going bad and now none work. I'm guessing I should have voltage here at the steering wheel for the horn...??? Fuse and relay seem good...

I just got done sorting this out on a Thermoquad... Shorten the choke pull off arm til the choke just has a crack at the top maybe a 1/8". You have to play with it, put the long end in a vise and bend it back at the 'elbow' but only a tiny bit at a time... < 1/16. It may take awhile til the...

Lutz said BMW would have been a good marriage for Chrysler. Similar size and place in the market. Benz treated Chrysler like garbage but 'anybody but Lutz' Iacocca selected a GM Euro guy to set the course for them which he later regretted... The new world order

Same problem here even though fuel still squirts no matter how long it sit's. I'm about to try a fuel check valve. They recommend putting it as close to the tank as possible.... Jack

Gibbs GP-1 uses the same American Refining Grps additive package Brad Penn originally used. There's some conflicting info on whether Penn Grade uses the same formula anymore. I haven't used Penn Grade but the Gibbs is green like the Brad Penn was.

Mine had 3.23 gears put in and power is not an issue. Sometimes I yearn for an OD gear on a trip but once I set the cruise I seem to forget about it and still get 14 mpg with a TQ.

The AMD's I bought didn't have the oil cap hole clocked correctly so the tabs pointed vertically or perpendicular to the cover. They sat around for couple yrs before I got around to putting them on so I figured there was no point contacting them. That was also a couple years ago and they been...

I didn't mention I'm working with a cut to length kit....

Hi All, Anybody with the speedo cable from the cruise to the tranny laying around that I can get an exact cable length ? The end twisted off mine and have since lost the piece. It appears there should be some pressure on the core going into the cruise since it's apparently spring loaded and I...

No rush...

Hi, have any numbers off the the thermoquads ?

When I dropped the pan on my '77 recently I replaced the shift linkage and throttle seals, adjusted the bands and used the FEL-PRO TOS18583 coated pan gasket. Used Valvoline Dex/Merc available at Wally world and just for good measure a 24oz bottle of the Lucas tranny fix but due to a shutter...

Does anyone have a pic of that idler pully and bracket ? I didn't know there was such a thing. My '77 belts jump all over the place when the A/C is on. There the Gates 7660 but with the upper hose and shield I can't tell where it would even go...?