Search results for query: *

  1. macr0w

    I finally got one!

    My son bought his when he was 17. Go figure.
  2. macr0w

    Torsion Bars not working

    Yes
  3. macr0w

    Torsion Bars not working

    Let me get some pics. I just texted my son a asked him to bring it over.
  4. macr0w

    Torsion Bars not working

    We have driven the car for many miles.
  5. macr0w

    Torsion Bars not working

    The torsion bars are factory. This is a 1965 Imperial Crown that is almost completely original. The adjustment bolts are not at the a-arms. They are at the rear of the bars, in the middle of the vehicle. All my cranking didn't seem to raise the car at all. It's still sitting at the same height...
  6. macr0w

    Torsion Bars not working

    Yeah, I've done all the above suggestions. Tried tires hanging, jacked up just a bit, all the weight down, one side at a time, etc... I've bounced and jounced all sides, measured from the fender to the street. It actually went down a half an inch after cranking the bolts up.
  7. macr0w

    Torsion Bars not working

    The front end is pretty low. I'm going to get a picture today. I'm pretty sure I've turned each side at least 4 or 5 complete revolutions.
  8. macr0w

    Torsion Bars not working

    Hey guys! My son and I installed new rear leaf springs and shocks on his 1965 Imperial Crown. That job went okay. Now that we are finished the rear end sits significantly higher than the front. We tried to crank the torsion bars up a little bit but, nothing happened. I ended up turning both...
  9. macr0w

    Speedo Cable Gear?

    The spring in question. :confused:
  10. macr0w

    Speedo Cable Gear?

    I got a new speedo from the amazing Murray Park today. I went over it carefully and I don't see that spring on it anywhere. Maybe it came from somewhere else. :confused: I installed it and it is working fine. I switched the odo's because I want the mileage to be accurate for this car. We have a...
  11. macr0w

    Speedo Cable Gear?

    Come on guys, surely someone knows where this spring goes. :p
  12. macr0w

    Speedo Cable Gear?

    Alright guys, Check this out. We pulled the speedo cable and found this. So naturally I thought "well, we just need a new speedo cable and gear. So, I called the ever cool and helpful Murray Park and ordered a cable and gear set. Cable shows up quickly and looks good. Let's slap this thing in...
  13. macr0w

    Speedo Cable Gear?

    Well, driving with no speedometer is not the real problem. He doesn't have a gas gauge either. We need to fix both. :D
  14. macr0w

    Speedo Cable Gear?

    And, I'll take a pic while it's out. You guys would probably get a kick out of how it looks. :p
  15. macr0w

    Speedo Cable Gear?

    Yeah, it's a 65. The gear was like that clearish yellow color like plastic with no color added. If it would stop raining I'll pull it out again. It ain't hard to do. I just have to get the thing jacked up and on some stands again.
  16. macr0w

    Speedo Cable Gear?

    I should have taken a pic. There was no clip on it. I can clearly see the 2 slots on the side where a clip would be. It wasn't on there. I tried to just pull it off and tried to pry with a screwdriver but it wouldn't budge. :confused:
  17. macr0w

    Speedo Cable Gear?

    Hey guys, recently the speedo in my son's 65 stopped working. So yesterday, we took the cable apart to look and see what was going on before ordering any parts and what we found was interesting. We pulled the cable loose from the back of the speedo and the pulled the other end out of the...
  18. macr0w

    Rear drums for 5×5.5 bolt pattern

    Is it going to work? :)
  19. macr0w

    Master Cylinder

    Yeah, the fitting I have just doesn't fit right. The specs on the page I bought it from say the port is a 9/16-18...
  20. macr0w

    Master Cylinder

    Also, Do I even need this distribution block?
Back
Top