Search results for query: *

  1. Mr onetwo

    Tech tip: How to align ur own suspension at home

    Is this a racing thing or everyday use? Never heard on that.
  2. Mr onetwo

    Yay....Stickers!

    Got my stickers...thanks Joey!:thankyou:Now if the frikkin' car was here.:BangHead:
  3. Mr onetwo

    Tech tip: How to align ur own suspension at home

    Back in the day I don't remember tire shops pushing 4 wheel alignments at all so thrust angle was not checked or talked about to my knowledge.I used to take care of the maintenance for a small fleet of about 20 trucks and vans. Never discussed and if you rotate tires every other oil change how...
  4. Mr onetwo

    Tech tip: How to align ur own suspension at home

    I'm going to try it just like in the video...string and jack stands, then confirmed with the plates. He does say that you may have to tweek it a bit after you drive it.If I wasn't retired I would not have time to do this probably.
  5. Mr onetwo

    Tech tip: How to align ur own suspension at home

    Please elaborate Mike. I spent a couple of hours contacting shops in my area and not one wanted to touch my car.The nearest shop that sounded competent is over 2 hours away, so trying this out makes sense to me.Other than caster,camber and toe what else is critical to a 53 year old cruiser like...
  6. Mr onetwo

    Tech tip: How to align ur own suspension at home

    I am so impressed I bought the tools and will try this out. :steering: Longacre Racing Products 52-78260 Longacre Caster Camber Gauges | Summit Racing Longacre Racing Products 52-79501 Longacre Toe-In Plates | Summit Racing
  7. Mr onetwo

    Tech tip: How to align ur own suspension at home

    Chris Birdsong posted this fantastic video on DIY front end alignments for Mopars...best I have seen
  8. Mr onetwo

    Drums to Disc...Today's Pricing

    I can confirm that the Raybestos pistons are steel and weigh a sh*t ton:thumbsup:
  9. Mr onetwo

    318 freeze plug 1968 Plymouth fury III

    good quality set of plugs Mancini Racing Brass Freeze Plug Kit
  10. Mr onetwo

    Drums to Disc...Today's Pricing

    picked up one of these cheap knockoff valves....we'll see if it works Mopar Disc Brake Proportioning Valve & Metering Valve for Disc Drum A,B,C and E | eBay
  11. Mr onetwo

    A bit Rough...

    I thought that was a pretty good trade until I saw this:welcome:
  12. Mr onetwo

    $ 500.00 BUCKS ?

    I asked him to come on over here...we'll see
  13. Mr onetwo

    A Good Evening...and a Good Riddance

    any updates?
  14. Mr onetwo

    I got the unanswerable questions you’ve been begging for

    Oh...I'd drive the h*ll outah that!:steering: I just wouldn't build it.
  15. Mr onetwo

    I got the unanswerable questions you’ve been begging for

    This is just my opinion. Be very careful in estimating your skill level and the time necessary to complete this project.The key word is complete....you may start off with 2 vehicles and end up with none.I was going to swap a hemi and an 8 speed into my 1970 Fury, but I have backed out.Maybe I am...
  16. Mr onetwo

    JFK Funeral Limo 1964 Imperial

  17. Mr onetwo

    JFK Funeral Limo 1964 Imperial

    The dates in several articles and on numerous websites are very confusing.When did Chrysler send the bodies over to Ghia? I don't think they are claiming that it was used in the funeral by Jackie....just in the cortege.But it was not, as stated above.I don't see the correct tail lights in the...
  18. Mr onetwo

    I got the unanswerable questions you’ve been begging for

    First off...how are you getting that HP figure?:confused:Have Moser build you a custom Dana 60. Forget the AWD...sell your current transmission and get an 8HP from a Hellcat or SRT Challenger.I am assuming you went with Sound German to control the 8HP.
  19. Mr onetwo

    Caliper beyond repair?

    fill in these parameters on car-part....lots all over the place
Back
Top