Search results for query: *

I guess there really is no accounting for taste on the part of the public at large. The first time I took notice of a '69 300 eleven years ago I was utterly smitten. I knew I had to have one, and I finally got mine in 2010. My number one daily driver since 1979 is still my '69 Dart Swinger 340...

Thanks for the comeback. I took a look at those, and they look like they would probably be okay.

Roof rail weather stripping for my '69 300 two door w. A/C: Where can I get it?

Driving a '69 Three Hundred.

Driving a '69 300.

Driving a '69 300.

:doggie1: I'm on the hunt for a Mopar Performance flywheel, P4876047. It's a 18.5 lb., 6-hole, neutral balance race flywheel for my '69 Dart. Thanks for helping. Joe

According to Richard Ehrenberg, SAE of Mopar Action Magazine, drum brake cars of this era did not have proportioning valves. When putting disks on the front it is best to install an adjustable proportioning valve, and that should be in the rear system. I located mine under the dash on my '69...

I don't what you mean by "ages", but on their website, Rare Parts make reference to their destructive test data for this part.

After some research, here's the good news. Rare Parts in Stockton, California manufactures them new three times stronger than OEM. Check out their website. FCRC Machine has them on sale for $87.99 each. The part numbers are 10166 & 10167. Get 'em while they're hot! Such a deal. Check out their...

Good luck with that one. My NAPA Prolink page indicates the RPC 10167 (left side) and the 10166 (right side) fitting the 1965 - 1973 C-Bodies, but they are no longer serviced. Check around. You'd think for such a broad application as that, somebody has a stash or is still producing them...

I have no idea. You might put that question out in the forum. Check the threads in the body section.

In the December 2014 issue of Mopar Action on page 70 Richard Ehrenberg wrote an article entitled "Seat Time". It is subtitled "New millennium seats for '60's Mopars". In short, Legendary has made new foam shapes and original style covers to fit. The outcome is a way better seat in terms of fit...

Where can I find a replacement package tray with speaker slots on both sides for my '69 300 two door? The interior color for this car is Saddle (tan).

The 360 degree gear in this photo appears to match the 2932919 listed in the 1969 Chrysler Parts Book. It was superseded with 3420864. Of course it cannot fit the housing that goes into my '69 300. Even in a pinch if the gear had 180 degrees of its teeth trimmed off, they might not mesh with the...

Not to worry. The torsion bar is easily removed from the H/L motor and door assembly. I am considering cutting the torsion bar or replacing it with square stock and a pair of u-joints for each side in order to eliminate the side loads on that plastic (read fragile) gear. I can only speculate...

The red electrical contacts cam and the 180 degree gear in my '69 300 matches the ones in this photo.

Thanks for the tip. I will phone him tomorrow.

Thanks for the tip. I will him tomorrow.