Search results for query: *

MRE AR207 alt. bracket for motor plate on bbm . Bought it but did not have room , passenger side water pump housing plus fuel pump . Mancini RACING $67.95 asking $50.00 plus $5.00 shipping . Thanks John

Thanks , just remember this was backyard fab at it's best , just throw in at the wall and see if it sticks , was not prefect but it worked . I have a tape of the Colt at the track , a friend is trying to get it loaded on a dvd if that happens I will try and post it .. Thanks

After making sure every thing lined up and worked , I cut a 3/8 round plate and welded it to the top of the strut tower and drilled a hole in it and bolted the top of the strut thru it . I welded a plate to the back of the strut tower and tied it to the roll cage under the dash . The car was...

This is rear of purple colt. rear 4 link , anti rotation bar , springs are not on shocks in the pic and lower diagonal link on 4 link . the ft set up was a street rod kit for an Anglia narrow track ..

Which car my car or the second colt ?

No pulled drive train out of it and started a 65 cuda pro street car but someone came to shop and wanted it more than I did so I sold it . The Colt body was sold to a friend that lived in SC. Put another blown 440 in it and showed it for several years and sold it to a guy that lived in Ohio ...

A few more pic's and another story about a 74 colt . After 8 years of building Pro street cars for mostly the Chevy guy's my skills got a little better , build this 72 Demon for a good friend of mine , was on cover of Mopar Collector's guide in 1992 won best of show at Bristol , along with...

Used on the street but 1 trip to strip 1/8 mile was 7 flat 100 mph just remember this was over 30 years ago plus ran a 4:10 gear and a small stall converter . would pick ft. wheels up about 2 inches for about 3 feet and hook hard ...

more pic's radiator was for big block Vega , the rear wheelwell opening flairs were half stock Colt and half fiberglass ones for a Vega cut off and spliced in the middle to get them to fit and look correct . My son at 15 he is 47 now . rear spoiler is cut down fiberglass AAR cuda spoiler with 13...

OK lets start by saying I started this car over 34 years ago it was a long haul trying to figure it how to but it together so you can get a good laugh on some of the stuff I did to get it up and together . I ended up with three 72 Colts , one out a back yard for $75.00 next 2 from a friend up...

OK Let me see what I can do , Most pic's I have are 3x5 size may have to take them and have them make larger so you can see the ugly details ,,,,

You should have a lot more head room in a Colt , the 72 I built I used 2 inch risers for the racing seats , I am 5 ft 10 inches tall . I sat the seats up as high as possible for leg room and so I could see over the blower on the 440 . I have a lot of build pic's if anyone wants to see them ...

C Body Bob , I do not remember , Just remember the AM radio blaring out SUNDAY ,SUNDAY , SUNDAY , Cowpasture racing at it's finest , ROXBORO DRAGWAY .. Narrow strip and went down hill about half way of the track ....

Back when I built mine I ended up with 3 of them at one time picked all the good stuff of the three and scrapped the rest . When I moved to AZ . found a 72 that was perfect for $900.00 passed on it , stuff out here don't rust .....

I am back Computer died , having to learn windows 10 ... DAM !!! Funnykarman

I was at Roxboro dragway when the cuda rolled .Made a run by his self , car went to the right , corrected went to left corrected again , back to the right and got in the dirt , got off the gas then back on , last thing I could see ,as the track goes down a hill and out of sight , next thing I...

Need to make sure where the wheel company takes their measurement from . I ordered a set of Cragar SS wheels with the back spacing of 5.5 . their wheel is 10 inches wide from where the wheel and tire seals but their overall width for the wheel is 11 inches , so when I ordered 5.5 inches of back...

The tire I am using is 10.5 wide and 28 inches tall . Mickey thompson radial , 28x12.0or15lt p/n MMT-6641 . Has a load rating of 1435 lbs . They work great in the rain and are a directional tire . Other tires may have more sidewall buldge than what these have . The wheels are Cragar SS . They...

Don't know I have... no idea , I saw this pic and remembered the 66 cuda , I was 18 at the time . Just remembered 66 car's accident , Hoping someone had a pic if it ....

still around ? Remember that was in 1967 , he ran the 65 car , converted it to AFX , built the 66 car , rolled it and pulled the engine back out of 66 car and put it back in the 65 to continue racing .. from what I remember the 66 car was blown and injected when the accident happened . This...