Search results for query: *

I probably have some somewhere too if you still need more. Question is if I can find them easily........

I've got a set of pedals in pieces that need clean up. Manual brakes - power brake very hard to find. The spring has rust pitting so not in good shape. I also have a z bar and the z bar frame bracket. These are from a 65 Fury. PM if interested.

Per our PM, I have an excellent set of 65 rails. And we can figure out how not to ship them. I will be driving right by you in a couple weeks.

65 Fury sway bar brackets. What you see is what you get. If shipped, I am willing to cut to small pieces for shipping, but you would lose the mounting reference. $40 pluys shipping or can deliver to the Mopar Nats.

I don't have any 68 but somewhere I have at least one from a 67. Are they the same? Mark

Good job! Do I see a washer under the bolt head? Do not use a washer anywhere on the flexplate hardware!!!!!

Yup - I got some too! This is just some of mine. I just don't like to reuse the old ones especiallty when you can buy new fairly cheap. As far as stripped threads in converter, I just helicoiled one in my race car. I have no concerns and it is 3500 lbs and makes 1060 hp. You will be fine...

Pretty sure its this one. Make sure yours is 1/2 inch long. https://www.summitracing.com/parts/arp-200-2903

Well I have a Plymouth one. I looked them up. The inner are all the same but the outer is Chrysler and Dodge. Plymouth is different. Good luck with your search!

Well I have transmission crossmembers and exhaust manifolds. PM if interested. $25 for crossmember plus actual shipping. Exhaust manifolds we would need to discuss.

What does it look like? I have several NOS ones but they may not fit a SF. I bought them for my Fury I.

I have a good 65 set available. I know the uppers are the same as the newer ones but I don't know about the lowers.

If desperate, you could always have them made. If they were mine, I personally would make them myself, but it would be a lot of work for me. Machining is only a hobby for me, but I have pretty good capability. Finding a 45 degree inverted flare cutter could be a challenge, but they are out...

I believe that they are the same as a 65 Fury. If so, I have a box full. Send me a PM.

So I measured tonight with a cheap set of calipers. I will remeasure tomorrow to make sure my measurements are correct. You will need to measure with calipers to determine if the measurements are the same or not.......

i got a several hubs/drums from a 65 but they are all 2 3/4". Are they the same?

Unfortunately I can't help with that. My familiarity is with the Fury gaskets and I can tell you for 65 Fury HT and Sedan are not even close. Your best best is probably calling Murray Park to see if he has a used one. I was going to do that for my 65 Fury Sedan but then they started to...

Best that I can tell, original part numbers in my book are 2482 580 (without vinyl roof) and 2605 882 (with vinyl roof). Assuming I'm looking at the book correctly. Quick google search tells me you are going to have a hard time finding one............ Problem is it only fits 4 door hardtops...

Hardtop and sedan are different........

I dunno but says in stock.......... Howards Cams, Rattler Hydraulic Flat Tappet Camshaft & Lifter Kit, Chrysler BB B/RB, 235/245 @ .050, .480/.488, 109 LS - Competition Products