Search results for query: *

I redid my insert when I got a new pad from Bob. One of locating studs was cracked off so I glued it. Sanded the original lumpy cracked vinyl down trying to avoid the edges. Painted gloss black but had a couple problems with whatever residue/adhesive was behind the original vinyl and had to...

I was working with another guy who is better a electrical than myself and was on a schedule. But If I had more time it is very likely I would have chosen to cut the dash support behind /on top of the clock to make a 3.5 fit. That would have eliminated the magnet width issue. Depth still would...

If I remember correctly the grill is metal comes out from the top. Should come out without interfering with windshield. It screws in from bottom where there is a mounting bracket that sandwiches the dash mtrl between speaker grill and mounting bracket. Then the stock speaker mounts to the...

I have one of those original spares all cleaned up and sitting in the rafters.

Try here - Interior Products, Seat Springs :Mega Parts USA

If he is an understanding friend have him take the metro outside the beltway so u have less forced sightseeing. Maybe Dulles airport....

Im thinking $15 should more than cover mtrls plus whatever shipping is .

If people are getting tired of waiting send me your mostly intact brittle survivor and I'll coat it with clear UV resin and make it water tight again......I even have new-ish black lids. Missing corners are no problem. It will need to be painted once done by the owner.

I use stabil 360 marine in everything. Definitely makes a difference in my small engines that are less cared for. I couldn't say for sure if the Fury benefits from it. I have forgotten and it started just fine.

If its not being used for the windshield then time to set up methanol or water injection...with dash switch as "booster" button.

This one with cap painted black? Ironic that if you find a new one that would work it looks out of place...not yellow enough. Some tan vinyl paint should help. Classic Car Windshield Washer Reservoir Pump Bottle Accessorie Jet Switch W/Hose | eBay

Well if you now look for broken ones that people are giving away...it could be salvaged.

I have successfully fixed a brittle, cracked, but mostly intact original using resins to line the inside and outside. It is possible. I fixed 2 actually, one is my current one. All lower corners were missing, about the size of a qtr. I fixed a worse off one also. Both required sanding and a bit...

If you like making stuff you could make one from a sedan plastic filler plate. This is mine. One day I may search out an original but until then...

Since the fury has blue lenses on almost all cluster lighting I used these blue bulbs that were not as bight as the white. They are not dimmable and if I need that I'll squint.

Yes, the exact ones your screen shotted are what I used in the taillights. Make sure you get the red ones. I did not need to replace the flashers after just the rears but as soon as i replaced more, like front turn signals with yellow version of these, then I needed new flashers - both turn...

BTW, here are the closeouts products - Wholesaler Closeout Parts : 1969 PLYMOUTH FURY 7.2L 440cid V8

I havnt put on front yet, although many have and its searchable. Some difficulty if not compressed. But as you said the rears are easy unless you have rusted bolts. This is rock auto 69 fury selection. I have the Monroe's circled. They seem OK. I'm guessing the KYBs are better.

Home speakers are 8ohm. Check out parts express. Or go crazy and get 2 pair of 5 1/4 4ohm and wire each pair in series.

And another homemade version with thicker material. The material was actually from a speaker grill from parts express. In my case I didnt even have the metal frame. I think I need to redo the chrome foil. Went you dont have your convertible rear seat speaker grill