1968 Plymouth fury iii wheel studs

[stu’s68furyiiirat]

I have left handed thread studs on drivers side want to switch them to righties any help would be great thanks in advance

 

[Welder guy]

1972 Fury III 360 101498 miles. Some info

 

[Welder guy]

RH wheel studs with .614 knurl

 

[Welder guy]

‘67 Monaco LHT wheel studs

 

[HOT FURY]

I have left handed thread studs on drivers side want to switch them to righties any help would be great thanks in advance

just go to most auto parts stores and purchase a set of right hand studs like are factory on the passenger side. easy to install with a hammer, socket, stack of washers, open end lug nuts or the expensive wheel stud tool you can buy also. Dont forget to use a little light oil on the knurls of the stud, threads, and lug nut at friction points. Can be done by hand or with an impact wrench if careful not to overstretch after seating into the hub

 

[68PK21 440.6bbl]

just go to most auto parts stores and purchase a set of right hand studs like are factory on the passenger side. easy to install with a hammer, socket, stack of washers, open end lug nuts or the expensive wheel stud tool you can buy also. Dont forget to use a little light oil on the knurls of the stud, threads, and lug nut at friction points. Can be done by hand or with an impact wrench if careful not to overstretch after seating into the hub

Also feel for the grooves from the previous lug to 'index' it to these grooves to make them go in way easier.

(edit) I'd leave the 'lefties' in there to fool todays punk wheel thieves!!!



.

 

[stu’s68furyiiirat]

Thanks to everyone that commented on this I really appreciate it