1970FuryConv
Old Man with a Hat
I want to paint the header trim above the rearview mirror, but am having trouble removing it. So Far
-Header trim: removed one screw either side of rear view mirror. Trim is loose at sides, but at center remains tight against windshield frame.
-Triangular trim piece at top of mirror shaft. The front screw screws into the header trim molding. The long rear screw screws into a metal clip. After this piece drops down on to the mirror, it does not expose any additional screws that need to be removed to remove the header trim molding
-Rear view mirror base, under header trim molding: loosened Phillips head screw, see pic below. Header trim still did not move.
-I don't have a replacement trim piece, so really can't risk damage to this one. I guess there's clip under the center of it somewhere, but Chapter 23 of FSM gives no hint of it. Any help is greatly appreciated!
-Header trim: removed one screw either side of rear view mirror. Trim is loose at sides, but at center remains tight against windshield frame.
-Triangular trim piece at top of mirror shaft. The front screw screws into the header trim molding. The long rear screw screws into a metal clip. After this piece drops down on to the mirror, it does not expose any additional screws that need to be removed to remove the header trim molding
-Rear view mirror base, under header trim molding: loosened Phillips head screw, see pic below. Header trim still did not move.
-I don't have a replacement trim piece, so really can't risk damage to this one. I guess there's clip under the center of it somewhere, but Chapter 23 of FSM gives no hint of it. Any help is greatly appreciated!