1976 chrysler new yorker part

[66furywagon]

1 reverse light anybody have 1
pm me with price thank u

 

[Mr C]

Do you know how to get that out? FYI, it's very difficult...the 3 screws only come out at the end of the procedure.

 

[66furywagon]

Do you know how to get that out? FYI, it's very difficult...the 3 screws only come out at the end of the procedure.

No never took 1 out

 

[Mr C]

That lens is held by a metal bracket that is bolted to the reinforcement behind the bumper. You have to unbolt the brackets to get the job done- otherwise you'll destroy your new lens. I've seen attempts without unbolting everything...always a failure. People see the 3 screws and figure that's all that there is to it.

 

[66furywagon]

Ok thank very much any leads on a lens

 

[Mr C]

I have a stash for myself, but no leads on anything else at this time. Mine are not for sale. You'll find these are often cracked/ broken- especially if the car has been used for towing.

 

[66furywagon]

I have a stash for myself, but no leads on anything else at this time. Mine are not for sale. You'll find these are often cracked/ broken- especially if the car has been used for towing.

Yes this 1towed and the hitch found the lens lol

 

[Pete Kaczmarski]

That lens is held by a metal bracket that is bolted to the reinforcement behind the bumper. You have to unbolt the brackets to get the job done- otherwise you'll destroy your new lens. I've seen attempts without unbolting everything...always a failure. People see the 3 screws and figure that's all that there is to it.

My '78 NYB must be a exception. Came out no problem. I used anti-seize on the screws when re-installing.

 

[Mr C]

You unbolted all the brackets when you changed it, right? My point is that you can't swap out lenses by merely undoing the 3 screws.

 

[Pete Kaczmarski]

You unbolted all the brackets when you changed it, right? My point is that you can't swap out lenses by merely undoing the 3 screws.

No, that is exactly what I did....unscrew three phillips head screws.

 

[commando1]

You unbolted all the brackets when you changed it, right? My point is that you can't swap out lenses by merely undoing the 3 screws.

No, that is exactly what I did....unscrew three phillips head screws.

You are the first person I have heard of that got off that easy. Lucky you.

Posted via Topify using Android

 

[66furywagon]

Still looking used or new

 

[commando1]

I have one but it would have to be pried from my cold dead fingers. Sorry....
Know anyone with a 3D printer?

Posted via Topify using Android

 

[66furywagon]

I have one but it would have to be pried from my cold dead fingers. Sorry....
Know anyone with a 3D printer?

Posted via Topify using Android

Ok don't know anybody with a 3d

 

[66furywagon]

still looking

 

[66furywagon]

Anybody. Used new anything

 

[1978 NYB]

That lens is a major pain in the *** to change. I had to change mine when I got the rust free perfect bumpers from NYB that was in El Paso.

 

[66furywagon]

heres

s_dancing2::sFl_america2:

 

[ALL_I_CAN_C]

I do believe I've got one. Before negotiations start, let me double check and get back with you.

 

[commando1]

I do believe I've got one. Before negotiations start...

Negotiations? Using the word negotiations tells me it's already too expensive.