WANTED 1979 300 Rear Interior Panels

[azblackhemi]

I need both left and right interior panels for my 79 300. Must NOT be brittle.

 

[marty mopar]

post here:

www.forfmjbodiesonly.com

1979 Chrysler 300 Owners Group | Facebook

Chrysler Cordoba owners club | Facebook

 

[Dobalovr]

Welcome to the 300 club! I was able to respray mine and they turned out great.

 

[azblackhemi]

Welcome to the 300 club! I was able to respray mine and they turned out great.

View attachment 558797

View attachment 558798

I could repair mine but they'll just crack in another place.

 

[Dobalovr]

I could repair mine but they'll just crack in another place.

Ya mine hadn't got quite that far but they were on their way DVAP might have some and Marty had lots of little bits and pieces at one time

 

[thethee]

Okay I'm going to suggest something that might be a little out there but have you considered covering them from the back with fiberglass and epoxy? Should give plenty strength and cracking protection.

 

[bnz84]

I have done this fiberglass resin thing on the back of stuff. I turned a floppy mess of a cardboard glove box into a box again. Rough up the plastic with sandpaper or a fine wire wheel. Because this will flex a bit when installing add any fabric you want. Old t-shirt, garden weed cloth (my cheap favorite for large continuous areas), old covid mask (same material as weed cloth), skidmark under ware, and of course fiberglass cloth. You can imbed metal too like a washer or metal screen. Seems like the brittle stuff that has very little of the flexible plasticizers left bonds better that new plastic. You can test it first.