WANTED 360 car pan wanted

[Sedanman]

I am looking for a 360 deep pan and pick up but will take a std pan and pick up. Let me know what ya got and pics. Thanks

 

[tallhair]

I think I have a 360 oil pan but why don't you just buy an aftermarket pan?

I ask because when i have advertised the SB oil pans before that's the response I get ... why would someone buy used crap when we can buy new from SUMMIT

 

[polara71]

You'd have to get aftermarket for a deep 360 pan, but who makes them for a C

 

[Sedanman]

It's just a center sump car pan and they fit all cars and probably have more room on a C body

 

[70bigblockdodge]

Actually less room t bars and idler to pitman arm distances between them is less. C body big block pans have a dent in pass side for idler arm aftermarket does not take this into account when making oil pans. Small block I'm not sure of but just to let you be aware.

 

[Sedanman]

< This is actually for an A body that I'm putting a 360 in. Thanks for the heads up though

 

[Sedanman]

The new stock mass produced pans are $50 shipped. I would prefer a deeper than stock pan. I also don't think the cheepy pan come with reinforcement like the originals do.

 

[fury fan]

Be aware on Summit pans - a couple of years ago I bought a 360 pan to use on a 5.2/5.9 Magnum and the rails were distorted. Not bent/damaged, but twisted because the tooling was jacked up. Took 3 pans and 6 months to get one that looked like it might bolt up OK.

 

[tallhair]

The new stock mass produced pans are $50 shipped. I would prefer a deeper than stock pan. I also don't think the cheepy pan come with reinforcement like the originals do.

can you cut a stock pan and add an inch or whatever depth is needed?