Wonderwagon
Well-Known Member
Today, was the day to check the heater box heater and condenser. Unfortunately the shop did not clean either. Off to the radiator shop for cleaning and pressure testing. In addition either ma mopar, a servicing in the past or more likely the shop that had the car finished or destroyed the heater box side facing the firewall (housing front) 4 of the seven studs were repaired with JB weld or epoxy in a hamfisted way and the bottom is cracked completely through in a corner. Best was nothing was tight, amazed.
Does anyone have a spare kicking around to sell, Murray Park is a resource as is a yard I know of, just toasty warm now.
PN 2936 352 is the front or 2936 288 which has the description of "housing A/ Condition and heater".
Also the blower motor resistor PN 2936 278 is missing, any thoughts?
Does anyone have a spare kicking around to sell, Murray Park is a resource as is a yard I know of, just toasty warm now.
PN 2936 352 is the front or 2936 288 which has the description of "housing A/ Condition and heater".
Also the blower motor resistor PN 2936 278 is missing, any thoughts?















