WANTED 75-78 Passenger Side Exhaust Manifold

[1978 NYB]

I need a 75-78 C-body Passenger Side exhaust manifold for a 440. A NOS manifold or a really solid no cracks used one will be good too.

It is going on this engine....

Please PM me with the specifics and price.

Thank You in advance!

 

[Deleted member 220]

Unfortunately the heat riser has been remover and holes brazed shut

 

[Wollfen]

I have a few but give me a day or two to pull then out an take pics.

 

[pomonamissel]

i'm petty sure i have one of those hanging out . got a casting # ?

 

[Welder guy]

It looks like you have HP (High performance) manifolds now , is that what your looking for ? They would look like these in the pictures.

 

[1978 NYB]

i'm petty sure i have one of those hanging out . got a casting # ?

I have a part number 4041 449.

The car is in the next county and I won't have access for a few days to check the actual casting number.

According to my parts book 76-78 right side exhaust manifolds are all the same.

Thanks!

 

[1978 NYB]

View attachment 213547 View attachment 213548 View attachment 213549 It looks like you have HP (High performance) manifolds now , is that what your looking for ? They would look like these in the pictures.

Thanks. Those won't work. I have logs (non performance manifolds).

 

[cantflip]

I have an out of control hoard that I need to dig through for others... This is the last week of my long schedule, so hopefully I can check for you and a few others... Lots of parts sorted into totes, in 2 locations... For a while, I had thought I was getting it organized... turns out I only made it harder to dig through (large totes).

 

[Wollfen]

Here is a few, but the only one with a number that is close is the one i took a closeup of, it is in good condition and the valve actuates still too. The number is 404 1468

 

[pomonamissel]

yes mine likes like wolfen's . got a flair on the exit . and he's way closer . so just let me know .

 

[1978 NYB]

Here is a few, but the only one with a number that is close is the one i took a closeup of, it is in good condition and the valve actuates still too. The number is 404 1468

View attachment 214025 View attachment 214026 View attachment 214027

Let me do a little research and see if if will fit. Can you possibly take a picture of the bottom of the flange showing the opening? Thanks.

 

[1978 NYB]

yes mine likes like wolfen's . got a flair on the exit . and he's way closer . so just let me know .

What is the casting # on It? Thanks.

 

[Wollfen]

Let me do a little research and see if if will fit. Can you possibly take a picture of the bottom of the flange showing the opening? Thanks.

I can do that, you will note in the main pic that it is the flanged type opening and the flange itself is still bolted on but hanging off to the side.

 

[1978 NYB]

I can do that, you will note in the main pic that it is the flanged type opening and the flange itself is still bolted on but hanging off to the side.

Thanks

 

[Wollfen]

Here is the pic, the butterfly is loose and will need to be tightened, the shaft though turns smoothly and the bimetallic strip pulls it back still.

 

[1978 NYB]

Here is the pic, the butterfly is loose and will need to be tightened, the shaft though turns smoothly and the bimetallic strip pulls it back still.

View attachment 214087

Thank You. I'm still researching. If it will work I will get it from you.

 

[1978 NYB]

Here is a few, but the only one with a number that is close is the one i took a closeup of, it is in good condition and the valve actuates still too. The number is 404 1468

View attachment 214025 View attachment 214026 View attachment 214027

This manifold will work.

PM sent.

 

[1978 NYB]

Here is a few, but the only one with a number that is close is the one i took a closeup of, it is in good condition and the valve actuates still too. The number is 404 1468

View attachment 214025 View attachment 214026 View attachment 214027

Your mailbox is full. I can't PM until you clean some of it out.

Thank you!

Bob

 

[pomonamissel]

same as wolfen's . the exit is 2 1/8 '' bolt spacing is 4'' with a working damper flap . i've got both sides as well .

 

[1978 NYB]

same as wolfen's . the exit is 2 1/8 '' bolt spacing is 4'' with a working damper flap . i've got both sides as well .

I bought the manifold from Wolfen.

Thanks, I will keep you in mind if I need either of the manifolds.

Bob