WANTED Cruise Control kit for my 66 Polara
- Thread starter mr. fix it
- Start date
- Status
Years ago, a friend of mine installed a kit he bought from JC Whitney. If I recall, it was pretty simple and it used a magnet that was attached to the drive shaft and a nearby sensor to pick up the speed of the magnet, as it rotated.
BigFury
Well-Known Member
I've got a 1973 factory set up, complete. No idea if it could be made to fit?
mr. fix it
Old Man with a Hat
i checked a couple of systems there and not sure which one will work..
it also seems like the trend these days is to not include the interior controls with the kit.
WorkerBee
Active Member
Not sure if you seen this system.......
Cruise Control for Cable Driven Speedometers
These aluminum lever covers would help match your interior.
Dakota Digital - Digital Instrumentation and Accessories
Cruise Control for Cable Driven Speedometers
These aluminum lever covers would help match your interior.
Dakota Digital - Digital Instrumentation and Accessories
traintech55
Senior Member
Do you still have the cruise control set up? If you do send me a PM with a price.
Most likely, the 73 unit can be made to work nicely. The only thing that might be different is how the turn signal stalk mounts to the switch, but that could be figured out.
Make sure you get everything... Speedo cables, brackets, wire harness etc. The 73 switch may be slightly different, but it will still work and look better than some aftermarket piece.
Make sure you get everything... Speedo cables, brackets, wire harness etc. The 73 switch may be slightly different, but it will still work and look better than some aftermarket piece.
BigFury
Well-Known Member
I will take a pic and post and I have no clue on how this option works. Or if I'm potentially missing anything.
BigFury
Well-Known Member
I do, I will post a pic and display as I'm not sure if there's anything missing. It's still mounted on the car
- Status
Similar threads
