Nov 2, 2017 #1 mopar Joe 65 Active Member Joined Jan 25, 2017 Messages 209 Reaction score 50 Location Tremonton, utah 84337 Could someone tell me which way this cowl rubber strip goe's on ? Also do i glue it on or just poke the tabs in the hole ? My old one was rotton and i forgot how it was installed. Any help would be great.
Could someone tell me which way this cowl rubber strip goe's on ? Also do i glue it on or just poke the tabs in the hole ? My old one was rotton and i forgot how it was installed. Any help would be great.
Nov 2, 2017 #2 tallhair Rufus T. Firefly Staff member Joined May 12, 2013 Messages 10,333 Reaction score 4,663 Location Mascoutah, Illinois There are no dumb qustion's i'm sure someone will be along to help soon
Nov 2, 2017 #3 300rag It's Not Going to Shift Itself Joined Dec 4, 2010 Messages 14,480 Reaction score 24,895 Location Cochrane, Alberta, Canada Just poke the tabs in, and I believe you have the correct orientation.
Nov 2, 2017 #4 mopar Joe 65 Active Member Joined Jan 25, 2017 Messages 209 Reaction score 50 Location Tremonton, utah 84337 I had a 50-50 chance of getting it right but i didn't want to pull it back off if it was wrong.Thanks for the info.
I had a 50-50 chance of getting it right but i didn't want to pull it back off if it was wrong.Thanks for the info.