Florida Mopar Car Show and Swap Meet November

IMG_20201114_080933438_HDR.jpg
IMG_20201114_080950644_HDR.jpg

Stopped at Cracker Barrel on the way in to the meet this morning. This car was parked out front:
 
Ha! Beat Rip to it.
D5A73D4F-B8FF-4B7B-A9C5-EBD370FC2ED4.jpeg

I recognize these two.
E1145EB7-C820-4A7A-AC54-B4287D152A81.jpeg

They look much better out in the sun.
F13DC4FB-7653-4F90-916A-48AFD30612C3.jpeg

An interesting neighbor showed up.
C6EA752D-CE51-40DA-9D93-116DBF60B5AE.jpeg

Always loved these wheels!
 
A couple more pics from in the Bat Cave. Awfully dark and a bit dusty in there but these kinda saw the light. The old iphone 5C still takes a decent pic.
B495BEF4-A992-4E68-BC2D-2CC80F7EA0FF.jpeg

‘69 Triple Pickle! I could live with it.
59ED5426-4D05-4BAA-BA8A-77028695B617.jpeg

These are always good photo subjects.
7A52527C-0A70-41E2-AB20-4D89E464BE99.jpeg

And yet another of Big Daddy’s projects.
00429EF3-073A-447A-9CFD-FCC352FD38A9.jpeg

Another shot of Will’s Polara, just because!
Those red wheel cover centers gotta be rare. I don’t recall seeing those “back in the day” other than a brochure pic.
Next weekend I hit the Turkey Run at the speedway again.
 
Ew!! A red shaker. Those are rare early builds. Very difficult to find.
Ya didn't happen to get the fender tag picture did you? Curious of it's SPD.
 
No fender tag pic.
As I recall certain early 70 high impact colors got the color matched Shaker. When they didn’t sell that well most were painted argent and made available on all the cuda and R/T engines.
 
So as I understand, there was only one colored shaker produced and it was for plymouth only. It was red. They had an advertising campaign that showed a red shaker and people demanded they get one in red. So Plymouth did so. Plymouth also beat dodge to the shaker hood and produced many before dodge got a chance to put them out there. After a short early burst of red shakers, all the shakers were argent after that. Red shakers are very rare.
 
Ew!! A red shaker. Those are rare early builds. Very difficult to find.
Ya didn't happen to get the fender tag picture did you? Curious of it's SPD.

didn't have a red shaker from the factory.

VIN is bs23r0b220065 with an SPD of c16

Carsten
 
Plymouth also beat dodge to the shaker hood and produced many before dodge got a chance to put them out there.

no.
Shakers were planned for Challengers with their introduction.
But they had a construction problem with the crumble zone.
As a result the shaker hood was readily available in april 1970 on the Challengers

Carsten
 
And it's a R0B too! awesome car. Too bad it's an original argent shaker.
fc7, I assume you are familiar with the car then.
I can't find any info on it from the sites or google with the exception of a link to barry's registry of lost and found BS's.
 
And it's a R0B too! awesome car. Too bad it's an original argent shaker.
fc7, I assume you are familiar with the car then.
I can't find any info on it from the sites or google with the exception of a link to barry's registry of lost and found BS's.

saw it at the garlits show in 2013 and took pics
 
Well, you probably know me well enough by now that you know I'm going to ask for the fender tag readout. If not, no big deal. But I gotta try.
 
85D043BC-A8D4-4293-B594-D25347360764.jpeg

This car? All the other photos in this brochure show the argent color.
I suspect the Lemon Twist, Hi C Orange and Black shakers I recall from back then were dealer or owner done.
A8644439-E6F9-441E-A583-2898D19554EB.jpeg

Here’s a red shaker on a Challenger. ‘course it’s a French brochure so who knows.
 
Damn it Rip. Now i’m hungry!
How was that train ride in this time of The Great Covid Crisis?
 
Back
Top