May 12, 2018 #1 TurboFury New Member Joined Mar 19, 2018 Messages 16 Reaction score 8 Location Minnesota need to know if I can take the pedal boaster and master out of a 67 to put in my 68
May 12, 2018 #2 mrfury68 Senior Member Joined Jul 15, 2015 Messages 1,646 Reaction score 2,023 Location Bethel Park PA Yes. 67 & 68 share quite a few mechanical parts. Any pics of your Fury? We like pics.
May 12, 2018 #3 C CBODY67 Old Man with a Hat Joined Mar 27, 2011 Messages 9,879 Reaction score 6,716 Booster, pedal, etc. would probably go back to '66, maybe '65. Difference is the master cyl, with dual cyl starting in '67. '67 and '68 were mechanically pretty much the same, other than any emissions hardware or calibrations. CBODY67
Booster, pedal, etc. would probably go back to '66, maybe '65. Difference is the master cyl, with dual cyl starting in '67. '67 and '68 were mechanically pretty much the same, other than any emissions hardware or calibrations. CBODY67
May 12, 2018 #4 TurboFury New Member Joined Mar 19, 2018 Messages 16 Reaction score 8 Location Minnesota Thanks guys. I was at the junk yard and found one to take it out of.
May 13, 2018 #5 TurboFury New Member Joined Mar 19, 2018 Messages 16 Reaction score 8 Location Minnesota Here’s where it’s at right now
May 13, 2018 #6 TurboFury New Member Joined Mar 19, 2018 Messages 16 Reaction score 8 Location Minnesota Did the trunk pan sorta did a tub job to fit some 295’s and almost done doing the quarters
May 13, 2018 #7 live4theking Old Man with a Hat Joined Nov 24, 2014 Messages 12,425 Reaction score 8,476 Location Rockland; Venango County Pennsylvania keep at it
May 14, 2018 #8 mrfury68 Senior Member Joined Jul 15, 2015 Messages 1,646 Reaction score 2,023 Location Bethel Park PA Nice work . Keep us updated on your progress .