Davews
Active Member
Cars been sitting for years waiting it's turn... just started working on her. Only part time so this will take
a while.
My 69 Polara restoration
- Thread starter Davews
- Start date
Davews
Active Member
Just finished dropping the old fuel tank, and drilling out my new trunk floor... 6 combind hours to drill out this pan and separate it from its original donor frame.
Ripinator
Old Man with a Hat
Man! That is a lotta work! Very nicely done.
Been there done that. Nice job, and nice condition donor pan!
I was able to get mine out of the donor car in one piece, but it was impossible to put into the recipient car in one piece. Had to slice it down one frame rail (between the spot welds) to get it in.
I was able to get mine out of the donor car in one piece, but it was impossible to put into the recipient car in one piece. Had to slice it down one frame rail (between the spot welds) to get it in.
sixpkrt
Senior Member
- Joined
- Jan 18, 2013
- Messages
- 2,274
- Reaction score
- 6,905
Nice work. The donor car must be pretty clean.
Davews
Active Member
Actually this pan came from Murray Park frame and all.... was probably well over 300 lbs.... the pan now only weighs about 40 to 50?
Davews
Active Member
Thanks for the positive comments... still looking for a lower quarter RH...
Desert Valley sent me a pair of really clean whole quarters for a great price.
Similar threads
