WANTED Original ring and gasket for the sending unit

[Zymurgy]

I stupidly threw mine away. I have a 1966 300. I figure multiple years should work too.

 

[rexus31]

Try eBay Mike.

 

[saforwardlook]

You might want to continue to search for an original ring, as I have heard of some guys using the repop rings and they were not thick enough to seal very well. He actually had fuel spilling out the back when he took off using the repop ring, even though it was turned as far as it could go to press down on the sending unit/gasket. Not safe.

 

[Zymurgy]

Nothing found on ebay yet. I will keep watching. I am going to Nats this year I would hope I could find one there at the very least.

 

[rexus31]

I'm certain Nigel at National Moparts has tons of these. Try giving him a call.

 

[Zymurgy]

I'm certain Nigel at National Moparts has tons of these. Try giving him a call.

Thanks Scott you know all the sources.

It appears I did throw it way. Went through all the boxes and shelves again. I did find some spare carb parts that I didn't even know I had from my rebuild kit, so that was good.

 

[Zymurgy]

I'm certain Nigel at National Moparts has tons of these. Try giving him a call.

Thanks Scott that was too easy. Nigel set me up and he definitely knows of the problem. I ordered from him before but my computer crashed and am still trying to retrieve my data including my stored favorite sites.