Power Antenna Help Needed

Samplingman

Old Man with a Hat
Joined
Apr 18, 2012
Messages
6,138
Reaction score
7,020
Location
South Jersey
So I’m attempting to gather all the parts to install the power antenna in my 1970 300 vert project, and am stumbling on the size of the antenna to fender bezel. Years ago I picked up what I thought was the correct bezel, but it is from 1969, part number 2926320. The hole in my fender is larger than the bezel and it slips right through. My question is did they cut the hole bigger for the manual antenna, or is the bezel actually bigger on the 1970? I took a look at my parts car, but the placement and size of the hole is different then any 1970 300 that I have seen, so is of no use.


1970 vert:

7B9B333D-F035-41FC-82EE-A2A294B12CA7.jpeg


28A59AFA-E148-46A7-8882-A295DDFB4E9E.jpeg


1970 TX9:

ACDDEBBE-0E86-4926-835E-349A2DD9506A.jpeg


28349680-92EB-4030-86F3-41617F15A774.jpeg
 
Last edited:
Going from my car, the power antenna is really in a very specific place because it needs to bolt to the lower brace.
 
Back
Top