ph23vo
Well-Known Member
- Joined
- Nov 20, 2010
- Messages
- 699
- Reaction score
- 569
................................
Nice.
The other related part is the C-shaped or U-shaped piece that clamps onto the pipe that slides into the slot in the rubber. Flat on the top area, curved on the bottom area. AND with the correct "drop-down" dimension.
The 2nd Gen Camaro/Firebird has a similar rear pipe hanger, but the tab that slides into the rubber is tacked onto the pipe instead of needing a clamp to hold it on. But with a different holding mechanism for the rubber.
Might find something similar in the hanger section of the Walker Exhaust caralog? Many of the OEM hangers used to be in there, but not sure about now.
CBODY67