source for Carter AFB secondary jets?

[DogBunny]

Is it possible to buy Carter AFB secondary jets? I found the primaries for sale, but no secondaries.
ALSO, it was pretty easy to read the numbers on my primaries, but there didn't seem to be any numbers on the secondaries. Does that sound right?

 

[commando1]

If you want to go richer, you can drill out the jets one step at a time using LETTER drills and a pin vise.
But you can't make them leaner.

 

[DogBunny]

Thanks, it's not a big deal, really just curious that you can't buy them, nor are they marked, so you don't really know what you have. One of my primary jets was buggered by a previous owner, and I had to use an extractor to get it out, thus, I just ordered new ones. But, I don't know what I would have done if it had been one of the secondaries that needed replacing. BTW, your "front end rebuild - complete" thread is great and very helpful. I'm gearing up to replace my upper control arm ball joints and bushings.

 

[70bigblockdodge]

You can go leaner solder them up redrill with smaller hole

 

[commando1]

You can go leaner solder them up redrill with smaller hole

That's tough one. I can't do that. I'll send mine to you.

 

[70bigblockdodge]

You might not like it my eyes aren't what they were 5 years ago

 

[moper]

I can't believe after all these years I never thought of that...lol. 100% serious. Thank You!

 

[commando1]

You keep drilling each time when there's an improvement.
You stop drilling when the last one didn't improve it any more.
Peak performance w/o buying a single set of jets.

 

[Knebel]

Edelbrock jets fit in the carter afb. Did it myselfe.

 

[70bigblockdodge]

I can't believe after all these years I never thought of that...lol. 100% serious. Thank You!

Mopar Action that's what makes the mag so great.