Does anyone know if there is the top part of a signal switch that will work on a 69 chrysler 300 saginaw with tilt,tele. Only the part with the catches is broke and it separates from the main switch easily once you pull the tilt arm out.
Turn signal part
- Thread starter jmustian
- Start date
I found the two wire top piece at classic industries and it has the mounting hole for the 3rd wire. It was $10 so no problem if it wont work.
The manufacturer of these cams is Shee-Mar. Their calatog lists the SM-15 as the correct replacement, but it only has two wires.
The third (purple) wire is for cornering lights, so SM-15 is only for cars without cornering lights.
Unfortunately, Shee-Mar doesn't list turn signal cams for cars with cornering lights.
But you could try and contact them. Maybe they have or even will make them.
From the Catalog:
C-BODY
(Full size - Fury, Imperial, Monaco, New Yorker, 300, Newport, Polara, Town & Country, etc.)
69 - 67
w/tilt & telescopic wheel
Switch = SM107T
Cam =SM-15
w/o tilt & telescopic wheel
Chrysler design (white)
Switch = SM106
Cam = May take either a SM-9, SM-13, or SM-16 depending on previous replacement of switch.
Saginaw built (reddish)
Switch = SM107
Cam = SM-15
The third (purple) wire is for cornering lights, so SM-15 is only for cars without cornering lights.
Unfortunately, Shee-Mar doesn't list turn signal cams for cars with cornering lights.
But you could try and contact them. Maybe they have or even will make them.
From the Catalog:
C-BODY
(Full size - Fury, Imperial, Monaco, New Yorker, 300, Newport, Polara, Town & Country, etc.)
69 - 67
w/tilt & telescopic wheel
Switch = SM107T
Cam =SM-15
w/o tilt & telescopic wheel
Chrysler design (white)
Switch = SM106
Cam = May take either a SM-9, SM-13, or SM-16 depending on previous replacement of switch.
Saginaw built (reddish)
Switch = SM107
Cam = SM-15
Last edited:
Thats great. I dont have cornering lights so i can just eliminate the wire.
Similar threads
