What are you working on today??

Took the Imperial out to Edgewater Park (large lakeside park in Albert Lea) for her glamour shots. Feel like I took way more than need be, got whittle it to five.
Now I've just need to decide if I'm actually going to send them in with the application. All for the chance to be apart of the Chrysler 100 display at Canterbury Park in September.
IMG_20250619_155729741_HDR.jpg
IMG_20250619_160128614_HDR.jpg
IMG_20250619_160211264_HDR.jpg
 
Tried replacing the filter for the well water (use it in the garden and shop). Had trouble getting the filter housing removed, and broke a piece of pvc pipe. Yay!
I added two couplings as everything was hard lined in.

Also hurriedly put things back together and one of the fittings came loose.

I got sprayed twice! Double yay!

Got it all together and am soaking the filter housing in vinegar as it had a magnificent coating of rust on the insides.

IMG_6348.jpeg
 
King Hooter said:
Took the Imperial out to Edgewater Park (large lakeside park in Albert Lea) for her glamour shots. Feel like I took way more than need be, got whittle it to five.
Now I've just need to decide if I'm actually going to send them in with the application. All for the chance to be apart of the Chrysler 100 display at Canterbury Park in September.
View attachment 724226View attachment 724228View attachment 724230
Click to expand...
I say do it, doesn’t hurt unless you try. Who knows, you might get lucky. The car looks more than deserving! Let us know what you decide
 
Blocking off guide coat.

96 degrees F ambient, but 105 degrees F at the car due to the concrete and metal around. At least it dries fast.

PXL_20250622_201953059.MP.jpg


PXL_20250622_201939800.MP.jpg


PXL_20250622_230254256.jpg

PXL_20250622_230302777.jpg
 
Last edited:
Bike left me stranded a few days ago, tested the starter, and took the battery out to charge it. Naturally while the bike is down I decided to go further and put the exhaust off and get it ready for the new pipes. The stock exhaust is massive on these VL1500 Intruders. Also removed the PAIRS equipment, it's an emissions system that will cause popping with aftermarket pipes, and typically reduces MPG, so it's going.
I need to test the starter solenoid still, and test and adjust the decompression system, but, I've run out of time today.
I'm very close to pulling the rest of the tins and painting them, but if I start that it'll never get back together for the season so I'll do that this winter.
20250624_112310.jpg
20250624_112300.jpg

20250624_112254.jpg
20250624_112520.jpg

This is my first Suzuki and I did not know the tank was under the seat. Makes painting the tins a lot easier, lol.
 
You must log in or register to reply here.

Similar threads

carguy300
Charging question.
Replies
16
Views
2K
jww427
jww427
WissaMan
If you think you have a working exhaust manifold flap, you may not
Replies
2
Views
578
WissaMan
WissaMan
carguy300
Spun a bearing?
Replies
11
Views
3K
carguy300
carguy300
C
Odometer and trip meter not working
Replies
2
Views
256
Cadee
C
1967Chrysler newport
67 Chrysler Newport muscle look
2
Replies
27
Views
2K
mopar preferred
mopar preferred
Back
Top