WANTED 71 fury upper window seal and outer window seals
- Thread starter CanCritter
- Start date
- Status
Mr C
Senior Member
Belt weatherstrip here:
Search Results
These guys may have your rail strip:
http://www.collectorsautosupply.com/query.asp?make=Mopar&year=0§ion=WSTRIP
Search Results
These guys may have your rail strip:
http://www.collectorsautosupply.com/query.asp?make=Mopar&year=0§ion=WSTRIP
Last edited:
C Body Bob
Old Man with a Hat
Wollfen
Old Man with a Hat
I would think that the new seals available in 1968 to 70 Chargers would be the same, also other B-bodies and ebodies, I am sure the profile is the same, I will go have a look at the ones I have to confirm this tomorrow, if it i the same then you can buy the new ones for chargers.
CanCritter
Senior Member
CanCritter
Senior Member
any luck with the seal comparison?
Wollfen
Old Man with a Hat
Oh crap sorry, I totally forgot, I will get on it tomorrow for you.
CanCritter
Senior Member
not a prob...know yer busy to 
Wollfen
Old Man with a Hat
Hey Dereck,
I checked the two types of seals I have here and can report back, the profiles of the seals is identical between charger, challenger and fury. The 68 Charger seal is a no go, even though it is the right profile and the length is good (76in) it has a kink for the front pillar post. The Challenger on the other hand doesn't have a kink in its length at all but it is 5 inches shorter. I wonder if contacting a manufacturer and asking them for slightly longer ones will work?
Plymouth Body Style Codes
My other idea is to check the length of the 72-74 charger seals available as they wont have a kink and may be longer than the Challenger ones. I'm not sure of the profile of the later charger units though.
I checked the two types of seals I have here and can report back, the profiles of the seals is identical between charger, challenger and fury. The 68 Charger seal is a no go, even though it is the right profile and the length is good (76in) it has a kink for the front pillar post. The Challenger on the other hand doesn't have a kink in its length at all but it is 5 inches shorter. I wonder if contacting a manufacturer and asking them for slightly longer ones will work?
Plymouth Body Style Codes
My other idea is to check the length of the 72-74 charger seals available as they wont have a kink and may be longer than the Challenger ones. I'm not sure of the profile of the later charger units though.
CanCritter
Senior Member
dang...was hopeing ld get lucky...thanx for checking...will see if l can find a length on the charger seals...flying blind here it seems..gona have to get Paul to take some pics so l know what lm huntin...
...now about that antenna pic.....
Wollfen
Old Man with a Hat
I think your best bet is to contact that manufacturer i gave you the link for, I am sure they could come to the party and offer you a rubber that's a few inches longer over the Ebody unit. Plus that antenna unit you were looking for, we worked out mine is an aftermarket unit, yah?dang...was hopeing ld get lucky...thanx for checking...will see if l can find a length on the charger seals...flying blind here it seems..gona have to get Paul to take some pics so l know what lm huntin...
...now about that antenna pic.....
CanCritter
Senior Member
alzimers....work...small dash of senility..work...what antenna.....
- Joined
- Nov 12, 2010
- Messages
- 3,247
- Reaction score
- 3,071
I have the following :
2902951 left roof rail weatherstrip. 1969-70 all C body 2 door hardtop
have it NOS or used. this is the long weatherstrip in the that runs the length of the roof line
3440493 NOS INNER FRONT DOOR GLASS TRACK GUIDE RUN 1970-73 C Bodies. have 2
the run is where the door glass rides...it keeps the glass from wobbling around
2902951 left roof rail weatherstrip. 1969-70 all C body 2 door hardtop
have it NOS or used. this is the long weatherstrip in the that runs the length of the roof line
3440493 NOS INNER FRONT DOOR GLASS TRACK GUIDE RUN 1970-73 C Bodies. have 2
the run is where the door glass rides...it keeps the glass from wobbling around
CanCritter
Senior Member
pm sent
- Joined
- Nov 12, 2010
- Messages
- 3,247
- Reaction score
- 3,071
2902950-1 R/L 1969-70 2 DR HT (1969 w/o vent wing) this fits all C Body cars
2900816-7 R/L 1969 2 DR HT w/o vent wing
3444230-1 R/L 1969-70 1970 (2 DR Formal HT) (1969 Fastback w/o vent wing)
3444228-9 R/L 1969 Fastback /vent wing
3581422-3 R/L 1971 2 DR Sedan,HT up to 1-1-71 build date
3581852-3 R/L 1971-73 same as above after build date above
3580098-9 R/L 1971 2 DR Formal HT
3759480-1 R/L 1974 2 DR HT
above are ALL 2 door roof rail weather strips from the 1974 Mitchell crash book
1969-74 are the years included in this crash book
as you can see there are lots of variations used here
all are Fury applications and no doubt will fit other C bodies besides the Fury
Right part numbers are right left are odd
I have 2902951 NOS
you can possibly locate other part numbers here, they are OEM part locators:
www.partsvoice.com
www.rearcounter.com
2900816-7 R/L 1969 2 DR HT w/o vent wing
3444230-1 R/L 1969-70 1970 (2 DR Formal HT) (1969 Fastback w/o vent wing)
3444228-9 R/L 1969 Fastback /vent wing
3581422-3 R/L 1971 2 DR Sedan,HT up to 1-1-71 build date
3581852-3 R/L 1971-73 same as above after build date above
3580098-9 R/L 1971 2 DR Formal HT
3759480-1 R/L 1974 2 DR HT
above are ALL 2 door roof rail weather strips from the 1974 Mitchell crash book
1969-74 are the years included in this crash book
as you can see there are lots of variations used here
all are Fury applications and no doubt will fit other C bodies besides the Fury
Right part numbers are right left are odd
I have 2902951 NOS
you can possibly locate other part numbers here, they are OEM part locators:
www.partsvoice.com
www.rearcounter.com
CanCritter
Senior Member
thanx kindly for the info....pm sent
HP2
New Member
HP2
New Member
Did the same thing. Hope the quality is good.
- Status
Similar threads
