WANTED brake drum & w/o trim

Status
Not open for further replies.

bluefury361

Old Man with a Hat
Joined
Mar 9, 2011
Messages
14,174
Reaction score
16,447
Location
Alabama Gulf Coast
Feedback: 14 / 0 / 0
Contact seller
Todays list consists of two items.
A left front brake drum and hub with good left hand threads, 11 X 2 3/4
And a right front wheel opening molding for a 67 Polara or Monaco 500. It is in sections and I only really need the forward/upper section.


Thanks for all your help here guys.
 
Last edited:
Are you sure the drum isn't 11" x 2 3/4"? That is what was factory installed on 67-67 C Body's. If yes, I might have one.
 
You are absolutely right (Dave)?. The drums are 11". I have revised my post.
I would be interested in the one you have.
Thanks
Will.

It's Bill. Do you need it before Carlisle or can it wait until Carlisle? I want to check it out before I commit but I am pretty sure that I have one off a 51,000 mile car that I converted to disc brakes.
 
It's Bill. Do you need it before Carlisle or can it wait until Carlisle? I want to check it out before I commit but I am pretty sure that I have one off a 51,000 mile car that I converted to disc brakes.






Thanks Bill. (I get confused sometimes). I could wait until Carlisle. I have a good drum that has right hand lug stud's and I likely won't be driving the Polara much before then. Are you planning on Carlisle?
 
Thanks Bill. (I get confused sometimes). I could wait until Carlisle. I have a good drum that has right hand lug stud's and I likely won't be driving the Polara much before then. Are you planning on Carlisle?

I will be vending at Carlisle this year. Spaces A-67 - A-68. Plan to start unloading and setting up on Tuesday so come on by.
 
I will be vending at Carlisle this year. Spaces A-67 - A-68. Plan to start unloading and setting up on Tuesday so come on by.






I,m planning a Tuesday arrival also. space's P 134/35/36. Jeff, (cantflip), is P137/38. Will see you there.
 
I have a brake drum located, thanks Bill.
I still need the right front upper wheel lip molding for my 67 Polara. I think Monaco's use the same molding. Maybe 68 also
.
 
Status
Not open for further replies.
Back
Top