Fan shroud 383 vs. 413

Dixon

New Member
Joined
Mar 25, 2019
Messages
47
Reaction score
25
Location
Summerfield, Fl
Does anyone know if a fan shroud for a 1965 Imperial 413 will fit a 1965 Newport 383 radiator? The seller indicates that it is a 22" which is correct. Thanks,
 
Parts book lists a different pair of numbers for the Imperial 22" rad shroud as compared to C bodies (which are different again than B bodies and A bodies...)
 
Last edited:
I have a spare 65 383 radiator shroud. Might be missing small parts, but those are easy to make. The 2 main pieces of the shroud are good. I was keeping it as a spare but now my car is done and I no longer need it.
 
I gave Jim at DMT a sample of the rubber cushions for that shroud, (including a bottom part of the shroud), at a show a couple years ago. Haven't checked if he's producing them yet though.
 
I gave Jim at DMT a sample of the rubber cushions for that shroud, (including a bottom part of the shroud), at a show a couple years ago. Haven't checked if he's producing them yet though.

That would be great! I found some that worked from E body clutch pedals I believe, but they were not great.

Quirey (the old Gary Goers) might be a better choice for rubber parts. He is making some 3 speed manual shifter bushings for me. Not sure Jim is really into rubber parts, but has been talking about if for years.
 
That would be great! I found some that worked from E body clutch pedals I believe, but they were not great.

Quirey (the old Gary Goers) might be a better choice for rubber parts. He is making some 3 speed manual shifter bushings for me. Not sure Jim is really into rubber parts, but has been talking about if for years.
I could probably come up with another sample if Quirey wants to give it a go, sounds like you are acquainted with him and I'm not.
 
Send some photos of what you are looking for. Some parts are easier to make than others. Dave
 
Send some photos of what you are looking for. Some parts are easier to make than others. Dave
Will do, it's a little rubber bumper about an inch long, 3/8" wide and the same tall.
 
I have a spare 65 383 radiator shroud. Might be missing small parts, but those are easy to make. The 2 main pieces of the shroud are good. I was keeping it as a spare but now my car is done and I no longer need it.
Would you consider selling it?
 
Send some photos of what you are looking for. Some parts are easier to make than others. Dave

Well I found 2 on my spare shroud. One crumbled when I took it off, but one came off in one piece, but it is cracked.

Dave - can you work with this?

IMG_7166.jpg


IMG_7173.jpg


IMG_7174.jpg


IMG_7176.jpg
 
Back
Top