Recent content by B2fast87

  1. B2fast87

    67 fury fuel guage

    Sending unit. Lock ring around the base.
  2. B2fast87

    Interior door trim removal

    Ok thanks I assumed that seal was glued in fairly well. Must be just spray adhesive maybe. Thanks
  3. B2fast87

    Interior door trim removal

    I have been looking but how do you remove the interior trim thats about a inch wide above the door back to the rear pillar. There is hidden screws. I feel I'm missing something.
  4. B2fast87

    Knurl size

    I ordered a set of them thanks
  5. B2fast87

    Knurl size

    Anyone know the stud size, knurl size of the 8 3/4 diff axle studs with drums. 1967 fury 3. Need to go a little longer, could pound them out and measure the knurl but I have the interior out redoing and running out of time, just thought I would ask Thanks
  6. B2fast87

    whats interchangeable with a 67 fury 3

    Its a 67 fury 3 119 wheel base, 2 door hard top. Need to do the headliner and carpet, seats are OK but might as well do them since they are out. Thanks for the info.
  7. B2fast87

    whats interchangeable with a 67 fury 3

    what car interior parts like carpet, seat covers, headliner's? would be interchangeable with a 67 fury 3. Was the Belvedere the same? Just wondering the options. I thought a 68 fury was different again.
  8. B2fast87

    67 fury fuel guage

    Update. Temp sensor replaced again and got that working. Ground the fuel tank sensor wire and guage moves. So I'm on the home stretch. Thanks for answering my questions makes sense now
  9. B2fast87

    67 fury fuel guage

    I put a new temp sensor in and warmed it up but guage never moved. Maybe a ground to the cluster ? The fuel guage is probably a sending unit as it has sat for a few years before I got the car.
  10. B2fast87

    67 fury fuel guage

    Ok, checked temp guage and grounded it and she climbs. Dash cluster not grounded proper than? have a new ground from block to fire wall clean and tight.
  11. B2fast87

    67 fury fuel guage

    I got ping signal from voltage regulator to both gauges. Is there a ground from the dash to the firewall that may cause these to not function. Gauges may be shot i guess.
  12. B2fast87

    67 fury fuel guage

    67 fury 3 temp and fuel guage not working, reading through forums and i see a common cluster voltage regulator problem. Tested the temp sensor wire and i get good ping on the light. Fuel sending unit wire nothing. Cluster voltage regulator should either be good or not correct? I can't see it...
  13. B2fast87

    Welcome B2fast87 to FCBO!

    thanks for the welcome. Had a 72 Demon for a few years but found a buyer. Picked up a 67 fury 3 barn find in great shape.
  14. B2fast87

    Welcome B2fast87 to FCBO!

    current owner of a 67 Plymouth Fury 3 and enjoy the mopar muscle era Location: Saskatchewan
Back
Top