Search results for query: window replacement

With the termination of replacement parts production, it becomes much more difficult to get an older vehicle to be able to pass an emissions test. The emissions laws in Kalifornia are a joke. Part of the emissions inspection is a visual. Who cares if the things that were originally on the cars...

I, am replacing the window motor so into the gate. The bottom seal below the scuff plate was from metro rubber, will have to look the # up, was not exact but worked. The runners inside the tailgate I got from Steele rubber it looks like the same is used in the upper track, but mine is still...

Something about your description does not really fit either the 4-dr sedan or 4-dr hardtop, as to "channel". Might download the Chrysler Parts Manual at www.mymopar.com and look at the illustrations of window channels/hardware for verification. You can also find a Chrysler Factory Service...

Damn it, wish I hadn't seen this thread, been working on this car for 25 years and now I have to start again! Just kidding, my 67 300 has had the top replaced once about 30 years ago, and looks about 3 inches short on that last bow. My issue is that the top material has come un stitched or...

I know these work with a '65. I have one in mine in the rear right and we put one in the right door of a friend's 300L. WINDOW LIFT MOTOR (NEW) fits: CHRYSLER FIFTH AVE IMPERIAL LEBARON NEW YORKER | eBay and WINDOW LIFT MOTOR (NEW) fits: CHRYSLER FIFTH AVE IMPERIAL LEBARON NEW YORKER | eBay...

Thanks everyone for all your replies and thoughts and comments. Three c's and a d- no aftermarket stereo, and u were on the right track about window retainers-vaanth it'd the pieces. Ayilar- see attached picture of 1971 fender tag. nb: i confused myself with my apparen early onset dementia...

I have read and researched, and the singular radio I found was a rebuilt on Ebay, and could not get a reply on fitment. It surprises me that there is no am/fm modern to fit the dash on this 66 fury. Simple two knobs and a display window....wth is so hard. Anyone found a replacement that...

I’m looking to find a suitable replacement rollers for my 68 T/C rear window. They are about 1” diameter with about a 3/8” diameter hole. Also will need the “keepers”. All I see online is rollers for coupe rear windows. Any help is appreciated.!

Some recent improvements to DRK SD 73. The car spent a little time at @71Polara383’s garage. He installed Mity Mount motor mounts, a transmission mount and a torque strap. All of which combined to completely eliminate engine vibration at idle and during acceleration from a complete stop...

We don't do donuts for the exhaust. If the original exhaust downpipe and bend is still alright, replace the manifold to flange gasket. I like thick graphite gaskets myself and have had excellent results with them. If the old pipe itself is burnt out, read the next paragraph. Get a flanged...

not listed for c bodies but almost an identical match to the factory ones unlike ALL the C body ones I found from the mopar restoration places like vans, mr moparts, etc

I just posted about this about 2 weeks ago if you want to look up the quarter window seal replacement post I made but here is probably the best seal for the leading edge between the rear quarter window and door window 1964-1969 Dodge Plymouth - Side Window Vertical Leading Edge | Steele Rubber...

Yes, the motors and gears are different between the 73 and 77s. As to your window, wobbling back-and-forth, it’s probably the roller bushings on the regulator that are bad. If that’s the case, then yes the regulator has to come out which does involve the spring as you mentioned. But there is a...

As @Trace 300 Hurst stated replacement parts for the H53 Airtemp II are very hard to obtain. First you will need manual A/C dash controls assembly to start your conversion to manual A/C. The electrical / vacuum switch will be more than likely need replacement. There are compatible switches...

Made a new friend today w/ a broken pass side door glass. The 1955 300 itself is pretty cool w/ a 331 Hemi power plant in its OEM configuration. My question is does anyone have or know where to get a replacement door glass for it. I am not well versed on the Forward Look cars I need help on this...

Thank you

Good day Everyone, Seeking help here. When I bought my 73 Newport 2 door hardtop, the front and rear glass both leaked and had been covered, or externally sealed with silicon. Since I had successfully fixed the issue on my 67 Newport long ago, that had the same issue, I figured I would do the...

The pictured plastic item is a glass channel bushing, part number 3581597, which is used to fasten the side window glass to the support bracket through the holes in the lower part of the glass. The bushing is fastened with fastener part number 3499813 in some 1971 - 1974 models. The following...

Thank you for the compliment and the advice. Are replacement gears readily available, or do I need to go to a specialty supplier?