Search results for query: window replacement

Hi Blish: The grease in these power window assemblies will harden and result in a locked - rotor condition for the power window motor, which would correlate to a large draw of amperage, which you have noted in the dimming lights, but very little or no movement of the window. The second issue...

Not mine, it’s on eBay. 1969 Chrysler 300 Series | eBay From the ad: CM27L9C227754 1969 CHRYSLER 300 CONVERTIBLE LIMITED PRODUCTION/ 1 OF 1933 BUILT ONE OWNER FOR OVER 50 YEARS EQUIPPED WITH: 440 CID ENGINE - 375 HP DUAL EXHAUSTS HEAVY DUTY AUTOMATIC TRANSMISSION MAXIMUM ENGINE...

Not mine of course and would usually ignore because this one is in bad shape. Yet seeing as how the seller calls the condition fair I thought I would post it. There is also that subtle ultimatum at the end. condition: fair cylinders: 8 cylinders drive: rwd fuel: gas odometer: 66000 paint...

Damn that is one gorgeous NY er.

Just did about 6 hours on the road and saw the car. Thankfully, it was nice weather and not much traffic. I spoke to the owner on the phone, he told me that only 1 person in the entire 6-7 years has ever actually came to see the vehicle. He said the only one was a serious Mopar enthusiast, so I...

IS THIS THE LAST HURST? Last week @david hill came across a Hurst in an obscure FB Market Place ad. It had just a few pics, including a VIN. He contacted me because he thought he found an obvious clone, because that VIN was 241389. That's the ONLY 24XXXX VIN we've seen and the "newest" VIN...

I hear you, Dan. I hope, for Dodge's sake, his setup is like yours and not mine.

well my 4160 holey was junl i leaked everyplace it was cheaper to replace it with the avs (I go te avs free from a freind tha rauns a mopar resteration yard / & yes i know cardone isnt the bes bi=ut we was told the select line was dion @ a differnt place than the rest r done .

Absolutely. But, I am thinking a replacement regulator is needed.

Rip’s frame is from a convertible and quite different from ours. Our mechanism is different due to the length of the glass. It kinda pivots so the pointy end doesn’t hit the wheelwell as it goes down. When you’re ready to start this project do a search in these forums for “quarter window” or...

Yep! @Analog Kid gets a special thanks for helping with sellers. Here are the originals that Wyatt pulled out: The big clips I ordered on eBay last November: I paid $23 at the time, but the price from the same vendor has fallen by half! The small clips I also bought on eBay last fall; here...

I do not believe that the sedan and wagon rear door cat whiskers are the same as the wagon doors are longer. I think QQE has them.

Chrysler never equipped any convertibles with vinal rear windows after 69, maybe 67. If you see a vinal one it's a cheap replacement. these folks will be able to supply you with a hi quality glass window. Convertible Tops and Convertible Top Parts

We dealt with Newstalgia for our 69 Fury. Good people to deal with and decent shipping time and prices. Just make sure you tell them which rear window/roofline you have. When you get the top, lay it out to rest prior to installation. It will have tons of extra fabric that will need to be trimmed...

Hi, these guys had the windshield for my '61 300G and in the correct tint. Classic Auto Glass Catalog - 1925 - 1995 - Windshield Glass, Back Glass, Door Glass, Vent Window Glass and Quarter Window Glass - Vintage Ford, Lincoln, Mercury, Plymouth, Chrysler, Dodge, Cadillac, Studebaker...

I've squirted penetrating oil on any and everything that looks like it moves. This is really becoming a problem as I can't park it anywhere except halfway in the garage. I am considering removing the tailgate just so I can park it but the thought of that big empty cavern and no solution is...

I made cardboard quarter panel liners several years ago. Got a hold of large cardboard sheets and used the originals for templates. Trimmed them out, marked out the folds and used a straight edge to fold them correctly. a can of black spray paint and you can't tell they are not original. Did it...

Not sure but my guess was the Reserve was too high for what people were willing to pay and the Seller did not respond to any questions. I checked it out a couple months ago. Dealer bought on a whim at a local auction for $15K. Would not budge on $19K price. They said they would put in another...

I am getting closer to starting my top replacement project, and have run into a couple of questions. Hoping folks here have some answers. :) First, my old top is pretty trashed, especially where the sail panels meet the quarter panel. I know there is a split in the top material along there...

We always need pictures, especially around the window channel area where you removed the vinyl and also how dirty it is. Sealers works best on a clean surface. How you removed the vinyl 'remnants' is important as if you used any metal object ie knife, (putty or utility) screwdriver etc. if you...