Search results for query: HOSE!

Hi thanks for these suggestions I will check them all out Thanks

Depending on the size of the leak in the green striped hose, it could affect the engine, but likely less than if the leak was in the line from the reservoir to the engine, or with a leaky reservoir itself. The reservoir could act as a buffer of sorts for the green striped hose and other...

Perhaps these are the right heater hose nipples?

I think I have found a cut in the vacuum hose from the vacuum reservoir on the fender of my '71 300. But I can't quite tell where the hose routes to so I can replace it. Does anyone know where this routes to? It is the line with the green stripe. Thank you, Todd

It was common to plug the EGR vac hose back then, keeping the valve closed. Better throttle response, especially off-idle , as things got back to normal from what it was with the EGR valve operational. It would be more incognito to put a ball bearing into the vac line where it plugs onto the...

I apologize I checked again I can see coolant coming from the box.

Sure seems that way. Maybe they put a hose inside the car and water them for a year or two.

Thank you I didn’t use it so far it’s fine . Such a mixed bag of answers

For the short upper rad hose, a friend bought one of the coolant filters and installed.

Used and unused hose and brass fittings. $10.00 plus shipping from 61109. No electronic payment. Check or money order.

Hi Vaanth, What vendor sells these hoses? Thanks, Ben

Yep, gonna do all of that once it’s all vacuumed, charged and operational. A/C hose is pretty thick already but I’m gonna make sure it isn’t directly touching any metal. Thanks Ross!

Nice! I would try to move that hose that is above the condensor and touching the radiator yoke in several places away from the metal, as it may rub through. At least put something as a sort of barrier that will take the rubbing rather than the hose itself. Same with the one I can see on the...

Agree. Time to do some cleaning. Let's see: Remove & replace rear brake hardware, Remove and clean and install wheel cylinders. Clean out axle lines and distribution block. R&R rear brake hose. Safety switch block, Remove, blow out with air, and replace. Replace left front brake line and line...

I had a spare bypass hose lying around but was for my 73 wagon. I ordered and got the correct bypass hose locally for a paltry 18 bux. New clamps too. I will start pulling it apart once I get a new pump and nipples in my hands. Then I will discover the leak location. It leaks pretty good to the...

I don't think you want to change to a '70 up pump. First issue is the outlet is on the wrong side. Then the heater hose and bypass nipples are part of the casting and not separate screw in nipples. If the new nipple doesn't cure the leak, the earlier pumps aren't hard to find or real...

I'm having a hard time to find out how the routing of the hoses for a 63 Imperial PCV go. Maybe someone can help me out. As you see in the picture the open end is connected to the air cleaner which I think is wrong but cannot find anything in the FSM. From what I know the PCV usually has on...

I know hose is new and not clogged as is fitting on engine side. Pulling it off with engine running and putting my thumb there , there's plenty of suction and no collapsing hose.

My son owns a very nice '76 Buick Skylark with the 260/4.3L Olds V8 without air. He's had three occasions in which the upper radiator hose has blown clean off the radiator! The hose and neck are unharmed. And, yes, the clamp is super-tight. The hose is three years old, as is the aluminum...

Lately they have become a item needing asked for. Not included in cylinders or hoses kits