Search results for query: *

Hmmm, it's also listed in Summit Racing, though not avail at the moment... Sherman Parts 013CTC-168-770 Sherman Trunk Floor Panels | Summit Racing Edit: and Summit seems to use SHI as prefix for Sherman parts also. There are tons of legit body panels shown with SHI

Oh crap, I already had my hopes up. Moparshop has been quite decent company, bit pricey but no problems in my previous purchases. I wonder where they have come up with the sherman brand name in the listing... Well, I have a bead roller so i guess that I should just get up my lazy butt and buy...

Wow, anyone else seen these? Not sure but isn't Sherman "quite ok" manufacturer for sheet metal? Atleast better than those classic 2 current stuff.. Trunk Floor C-Body full 65up, 628,47 €

Thanks MEV, that was new to me that there are also 45degree JIC like fittings available, apparently those are called SAE fittings but they have same threads. This is quote from qchydraulics.com: "The most common flare fitting standards in use today are the 45° SAE style, and the 37° AN style...

I have used standard steel hydraulic piping with JIC flare as it is the same as used in AN fittings. Or basically the whole AN fitting system is just a "lightweigth" version of industry standard JIC fittings. So if you have some hydraulic shop nearby, you can get the items from there. Also the...

One vote for the transmission mount. The new rubber mounts are incredibly poor quality. I wasted one in my Challenger in less than 5000 miles, went for polyurethane bushings after that. The sagged and ripped mount caused significant weird vibrations 50mph+ velocities. Also I think that bad...

I'll buy that low deck M1 from you if you are selling and you would be willing to ship it to Finland. About that lever, it shouldn't be hard to cut and weld it back to original shape. Then some some magic with grinding disc and paint and it would be pristine again if you like to tinker.

Have you checked with the new mechanical pump and rod that the pump is or isn't pumping anything if the line to the carb is disconnected? Didn't notice that from your previous post. I am just guessing here but you might also have a stuck needle in the carb in addition of the other already found...

I had 800cfm Thunder. It worked perfectly with edelbrock performer 383 dual plane intake and milder cam but struggled with street dominator and hotter cam.

I have SD on my 383 in a Challenger with 3.23 gears and about 2800 stall converter. It was a dog with edelbrock avs thunder down low but run great on high rpm. I switched to Holley by friend's recommendation and got **** load of low end grunt more and the same high end power. Now it rips the 275...

Soak in thinner or brake cleaner to remove all oil and then overnight on citric acid or shorter dip into phosphoric acid. I guess that day or two in coca cola might do the job too after good degreasing. Remember to rinse well after acid dip. Could add some baking soda to rinse water to...

Sorry I misread and thought that it was a pair which would have been a real bargain! I think that I will pass as the shipping for only one vs pair is bit pricey and I would still have to find a second one from somewhere

I'll take those if still available. Can you check the shipping price to Finland? USPS is still probably the cheapest one.

Hmm is it actually a flanged, so that you could just drill it open and use bolt and nut? That's what i would do in a heartbeat if I didn't have a welder. With a welder and washer & nut trick the steel bolt should come out easily from cast iron manifold. Just use as much power as possible to...

5.9 magnum responds very well to custom tune. I understood that you can get lots of more torque with updated tune. Not sure which companies still offer tunes to older magnums. I am planning on getting hptuner software as I am swapping -97 5.9 magnum to -84 Ramcharger

I really wouldn't be that worried about one bolt missing. Whole torque of the engine is transmitted to transmission via four smaller bolts in significantly smaller diameter. I doubt that the bellhousing connection to the block is the weakest link. Of course it will induce some uneven strain...

These https://www.ebay.com/itm/352244829804 And couple cheap turbos from same place and you would have plenty of torque:lol:

The controller or the hand held should not freeze, in my opinion that is not normal in anyway. I would suspect that there is some thermal problems with the ecu ecu itself, maybe some bad component or bad solder on the circuit board. I would inspect that first and contact fitech

I am looking for a single plane M1 intake for 383 for multiport efi conversion. Shipping would be to Finland. Thanks!

Hello, I have some problems finding a mixing formula for -72 Plymouth fury gold leaf color. I have found by googling chrysler code DT63559, PPG code 2307, Dupont code 5309 followed by different letters and sherwin williams code 3126. None of those gave a hit with paint shops modern and not so...