Search results for query: *

  1. J

    Working on my 71 300

    Epilogue: It would have been smart to take serious rust precautions for the sunroof. After 6 years, the vinyl roof is now off again (and will not be replaced), the sunroof is extremely rusty due to poor workmanship (and was the first thing to break anyway due to the driver cable tearing off). In...
  2. MAXWEDGECHAR

    Transmission Filter

    My '63 Max had the inline filter and the one in the trans pan. If you still have the inline filter take it off. Mine was clogged and the weak point is the converter/front pump seal. At one point, I was on the road, and it was poring out faster than I could put it in!
  3. my1966chrysler

    On The Road Again

    Looks like a highly option 300
  4. straightjob

    62 imperail 413 idles for 20 seconds wont accelerate runs rough hard starting

    I replaced the fuel pump carb have a new plastic tank and had the carter 4 bbl rebuilt all new fuel system car runs only @ idle for 30 seconds wont take acceleration shuts down ugh! Im baffled i have to move the distributor towards the right all the way to get it to fire. When it idles its...
  5. Kenji Okazaki

    69 Chrysler 300 back where it belongs.

    Do you still have this 300 for sale ?
  6. polara71

    NOT MINE 1965 Chrysler 300L - $15,500/ new link reduced price of $10.5k

    I'll give you a third option, the market has peaked, at least for now.
  7. coco

    NOT MINE 1965 Chrysler 300L - $15,500/ new link reduced price of $10.5k

    Now $10.5k must be desperate for cash ? or is ad a fake ?
  8. N

    New Member, New Polara

    I just read your thread from the beginning, a great read. Always amazing what bodgery can lie under the paint of an old car, I remember one holden panelvan I had where I discovered new outer sill/rockers had been tacked on top of the original rusted out ones - after grinding off buckets of...
  9. Gerald Morris

    AFTERMARKET REPLACEMENT RADIATOR SUGGESTIONS

    I recommend US Radiator for the Top Quality copper jobs. OER makes an assortment of them too. Alas, I'm constrained by a 22" radiator yoke, so I must use radiators which have a bit more depth to get the necessary surface area AND volume to cool my 383 in urban southern AZ heat. U.S. Radiator...
  10. BAD69FURY

    WANTED rear shocks for 68 plymouth sport fury 2 door fasttop

    Thank you for offering, I went ahead and purchased the KYB KG5512’s from rock auto.
  11. Polara_500_Jr

    Valve cover spark plug wire grommets

    awesome. 4 years later and I can still grab the file. I'll be printing these for my Polara this week!
  12. M

    Tux all cleaned and waxed for the big show.

    Much nicer than a Porsche, Lamborghini, or a Ferrari, for sure......
  13. 3175375

    Voyager 1 and 2 still alive!!!! 38,000 mph!

    Hubble also appears to be back in operation (with only one gyro): NASA’s Hubble Restarts Science in New Pointing Mode - NASA Science
  14. 3175375

    Voyager 1 and 2 still alive!!!! 38,000 mph!

    Voyager appears to be back in data transmission mode: Voyager 1 Returning Science Data From All Four Instruments - NASA Science
  15. X

    69 Town & Country Wagon

    He also just picked up a '69 Newport woody convert with power seat and power windows parked since 1984 ...... The Unskilled Mechanic . .
  16. The_Eagles’_Nest

    Identify this part

    Figures, lol. It was sold as fitting both.
  17. MoPar~Man

    Fuselage C-Body Wagon Tire Pressure help

    For what it's worth, the air pressure decal on my '67 Monaco:
  18. MoPar~Man

    Identify this part

    Some goog'ling indicates it might be a blower switch for a non-AC (heater only) car.
  19. Trace 300 Hurst

    Meet Regina FQ3, a 1970 Polara convertible who turns 51 today

    Not at that show, but since you asked.....
Back
Top