Search results for query: *

Check this out.I found this in my stack of documents after I got Bertha.

Does anyone know of a replacement motor that can be adapted to a 69? Mine is dead.I took it apart and attempted to repair. It seems as though it could have been shorting to ground and/or the limit switches are shot.I was wondering if ayone has Frankensteined a late model motor that works? Miata...

Has anyone ever had this issue before? I have replaced tranny pan gasket at least 3 times in the last 2 weeks only to find 2 puddles the next morning. The last replacement I used a Felpro gasket and Blue silicone Hi temp gasket sealer. Still the same result. I am going to drop pan yet again...

Well I am happy to finally report that Big Blue is mobile again..I did not have lalve hooked up correctly. Clumsy me. I want to thank Newp Commando1 Azblackhemi Stormer and Thrashingcows for their assistance.

So today I took it all back apart again. I found the parking pawl jammed past its little home. Will try to get reseated tomorrow and hopefully the trans seal/rooster comb ball and spring/parking pawl saga will be put to rest and I can turn my attention to screwing up other perfectly good things...

So today I removed assebly and found spring and ball as previously discussed. Got it all back together, worked shifter through gears, happy to hear it clicking positively into gear. Put it all back together and the first thing I noticed was it wouldnt start in park.No problem (started in...

So today I had no work( Electrical Contractor), I thought it would be a good idea to replace that leaky shifter seal. Knowing the tool I bought was not as advertized, I went to my local Home Depot and got a carbide bit for my Dremel. 2 hours later and a lot of back and forth under car(checking...

Ok guys heres another one. Anybody use the trans seal removal tool? Mine just came today so I set about removing linkage and happy as a clam that I didnt have to remove tranny to replace leaky seal. 20 minute job. Right? Not so much. An hour later I still havent replaced seal or even got it...

OK, heres one for you. Went to NAPA with the socket in hand,they couldnt find anything.Just spent an hour trying online to find them,no luck. It appears to be a miniature base,screw in (not bayonet) type of bulb. The existing bulb got destroyed during removal,so I have no basis for comparison...

Anyone know where its located? 1969 300.

OK guys, first of many questions to be sure. So my 69 300 has a steady leak (auto trans) where the linkage connects. Is this fixable without removing tranny? What part # (seal or gasket) is needed? Thanks a bunch. I have an online parts catalog but cannot figure out which part it could be. Tim.

Here we go,lots to do...

Hello everyone, I just bought my first Mopar, a 1969 300, either aquamarine or Bahama blue metallic with white interior. I am receiving it this Friday the 7th. It is, I believe, a restorers dream. It shows 60k miles and has reportedly been stored in a warehouse since 1979...It certainly looks...