Search results for query: *

Have a 1960 Fury that we are changing from Aqua to Red interior. What kind of paint is used for the dash and interior trim pieces. Color looks about the same as the exterior, but it seems like it is more of a satin finish. Almost like it has a little bit of texture to it.

Have a 1960 Fury that we are changing from Aqua to Red interior. What color head liner comes with the red interior. I have been getting different answers from different interior places from white vinyl to and ivory colored fabric. The original head liner was a fabric, not a perforated vinyl.

Can anyone send me a picture of the back side of the rear bumper for a 62? I sent mine off to get chromed and it appears they cut the mounts off the back to straighten a couple of dents and never welded them back on.

Hoping someone can tell me what Is original here and what it not. Package tray has a cardboard like stuff on bottom, looks original I think. Then a piece of hardboard with holes drilled in it for the speakers, looks home made. Then the fabric, is the fabric the original stuff? Has a seam in the...

For the rubber molded parts I got from Quirey what do you recomend for adhesive? I am using 3M 8008 and they peal right off, glue not sticking to the rubber at all. I did try cleaning with acetone ahead of time and that made no difference. Just checked the trunk weather strip I did and same...

1962 Crown 4 Door Is there anyway to adjust the hinge on the vent window? Sure doesn't seem like you can. The glass on the vent window sits too far back at the hinge and above it. Glass does not seal on the front edge, and the back edge is actually hitting the division bar frame when you...

Does anyone make a correct fire wall insulation for a 1962. I ordered one from Collectors Auto supply that says it is but it's not even close. The fire wall, kick panels, towel insulation, none of it fits the car.

Anyone found a replacement for the felt insert that the glass rides in on the vent window division bar. For a 1962 Crown 4 Door. I have a picture of the original and one I just got that I thought would work. It is way too tight for the glass to fit in it.

Does anyone have new seals for the front wing windows on a 62 Crown 4 door? Also trying to find the correct door gaskets and all I seem to find is generic length of gasket, nothing actually molded correctly.

Does anyone know where to get this correct carpet padding for a 1962 Crown?

Want to send my dash in to Just Dashes. Any tips and tricks on how to get it out? I started on it and by the looks of it, it all comes out in one pieces, upper and lower. I was expecting the upper dash to be seperate.

I think 61-63 had the same gauge cluster. Can anyone tell me if they are exactly the same? I have two and I though one was just faded out but when I compare them one seems to be painted more of a gray and the other is black. The one that is black the water temp is gray faded looking.

Had one of the power window motors in my 1962 Imperial that didn't work. Tore it apart and found that the commutator was all cracked and falling apart. Found a new one to replace it and works perfect now. Also you can easily remove the motor with out taking all the arms and tracks out, just one...

I have a 62. I know the hump is smaller in the 62 then the 61 do to the transmission change. Problem is that you can't find molded carpet for a 62, only the 61. 62's are all sewn. So has anyone ever attempted to put 61 carpet in a 62 and can say how it fits?

1962 Crown Can someone explain the operation of the windshield switch, mine is erratic and not knowing how it is supposed to work makes it hard to figure out. Is there a high and low and where are they on the switch? Is it supposed to be variable speed?

I think my booster is bad. I have searched high and low and can't seem to find a new one. I have seen a number of rebuild kits, can anyone tell me if any of them will work on the Imperial booster?

So I know something must supposed to be here to adjust what way the air blows. I found a chrome vent in the truck that I think goes over by the drives door but the round duct is missing. I want to get the correct parts just don't have any pictures of what it is supposed to look like. 1962 Crown

Does anyone have the correct part numbers for Bearing, Race, Inner Seal, and Outer seal for the rear of a 1962 Imperial. Every parts store I call comes up with different numbers and I can't get a straight answer.

So who can tell me what is going on with these two sellers. Same product? The same picture is used for both. They are located in cities that are 7 miles from each other. One says 62-66 and the other says 64-66 ? Something just sounds fishy, $145 difference in price. 1964-1966 CHRYSLER IMPERIAL...

I need to do a complete rebuild on a 1960 Poly 318 Need Pistons, Cam, Lifters, Bearing, rings the whole works What are some good sources out there to get parts. Also a good cam recommendation to gain some performance, will be a 4bll if I can find an intake.