Search results for query: *

  1. B

    Picture of 65-68 4-spd transmission crossmember

    I concur with rd92west....I was able to find a NOS isolator, any moons ago.
  2. B

    Sub Frame Connectors

    I did not through the floor.. I made a nut assy and welded into the upper rail - so tube is linked together. Going thru the stiffening ribs - might work (forget where they lay across) Straight thru the floor sheet metal, i would back up with a plate in interior.
  3. B

    Aluminum Radiator Nightmare!

    Suggestion, post some pictures Most probable, bracket cant be removed and another bracket can be TIG welded back on
  4. B

    Passon overdrive 4speed

    I also have a Passon, 4 speed, in '68 Newport, 440 - bored / stroke to 541 cu in , Dana 60 rear end with 4:10's Been to the drag strip a couple of times, lot's of fun in 1,2 and 3rd....(107 mph, 12.97 - if I new how to launch would be better) Very happy with it, Jamie is a neat guy - stated no...
  5. B

    Rock Auto - has 1973 Brake Calipers in stock - Cardone

    Aftermarket rotors I have measure 1.220"
  6. B

    Rock Auto - has 1973 Brake Calipers in stock - Cardone

    Hi All, Rock auto has calipers back in stock. I have both of my 68's converted to 1973 disc.....and have been looking for a spare set Came coated, with slide pins + retainer Pleasantly surprised ($38.79 + 12.60 core = $51.39)
  7. B

    Slab rear sway bar - 68 Newport

    Firmfeel Mopar Suspension and Steering I used these guys. How much a driving difference ? Car handles really nice.....but too much time between driving without and with + numerous other upgrades.
  8. B

    WANTED ‘68 2DHT Headliner Bows

    I have a complete set of bows + side trim. I have cleared my messages - but could not send you a message
  9. B

    SOLD Viscous clutch fan 3462186

    Cutting down my multiple spares.... 7 Blade fan - approx 20" Diameter, with Viscous clutch Fan was sand blasted, epoxy coated Viscous clutch - very nice looking $75 or best offer Shipping from Jamestown, NY 14701 Box size 21" by 23" by 8" - Approx 11 lbs Thanks for looking
  10. B

    For Sale 2 Door Qtrs, interior sail panels

    Botch the post up. $40 + shipping from 14701
  11. B

    For Sale 2 Door Qtrs, interior sail panels

    1967-1968 CHRYSLER DODGE PLYMOUTH C-BODY QUARTER SAIL PANEL TRIM INTERIOR PAIR. Lights, wiring harness, mounting plates No cracks
  12. B

    SOLD Power Seat Parts, switch, motor, actuators

    Switch & Motor sold Have all actuators. passenger side cables - available
  13. B

    For Sale 1968 Front Sway Bar & Links

    Factory Sway bar - sand blasted, epoxy coated Links - sand blasted - painted, new bushings Strut connectors - sand blasted, plated, new bushings Thanks for looking $50 + Shipping
  14. B

    SOLD Power Seat Parts, switch, motor, actuators

    From a 1967 - Chrysler Tried selling as a whole.....breaking up to make shipping more reasonable All components work. Will work with on best shipping method. Motor / Drivers side actuators - $40 Cables drives / Pass side actuators - $40 Switch - $20 Seat base / side closure trim - $10...
  15. B

    For Sale Power Antenna Mounting Kit, Application ?

    Found a picture of the original packaging - Part No 2926690 - for the kit Application is for a 1969 Chrysler ... Picture of number on bezel
  16. B

    Dana 60

    Dr Diff, great place Exactly who I used, to ebody specs, gained me a little more room for big tires... Occasional Drag racing, summer cruising.....bored and stroked 440 to 541, with 6 pack set up, Passon hemi 4 speed....other than that, it is stock... Understood, it does not make a lot of sense.
  17. B

    Dana 60

    To your question, Can it be done - Yes. I have done it. I used an ebody dana...... Did it make financial sense - No. It did make a 4200 lb Chrysler run under 13 seconds in 1/4 Would a Ford be cheaper - Yes.... but that's like having a 32' ford with a chevy motor
  18. B

    Looking '68 speed servo, 2 vacuum lines, swap ?

    Hello, Looking for '68 speed servo, 2 vacuum line unit. I have a NOS - 29512272 - willing consider as a trade, or just buy from you Here is what I am looking for: If anyone has Part No. - I would appreciate it Thank You
Back
Top