Search results for query: *

Did not even think of magnets. Still gotta drill a couple of new holes. But it’s not going to be the 14 it has

Nope. They’re lining up in the middle of holes on the door. And the bottom ones are about 2 inches too high. The original cards were really messed up so I kinda had to wing it with tracing it out on the new one

Good afternoon all and happy new year!! I have a few questions that maybe someone else figured out. So I redid my door cards on my 68 300. I don’t know how I messed up but now none of the clips match up with any of the holes in the door. I was thinking drill new holes in the doors to match the...

Printed one up using PETG. It works! Who knows for how long though.

Ok. One more then I’ll shut up for awhile. These?

Yep. Thanks! Turns out the ones I took pics of are spares that I suppose came with the car. Cuz they’re already on the windows and match up.

Yes it does. Thanks

Well, since I started piecing my interior back together, can anyone tell me where these 4 parts go? Someone, who shall remain nameless, just ripped and teared stuff out without marking it. Thanks again!!!

AutoCAD program and my 3D printer

Absolutely. If anyone needs one or any unobtainable part. I’ll happily give it a shot to print out what’s needed. Just send me a pic

Yep, I ordered some petg and some abs. Gonna see which works best

Test 3D print using just PLA. Did it with fusion360

I just used an interior fork tool. Popped right off. The stud is still there so maybe find a sleeve for the print and shove it on. The pressure should keep it in place. I’ll post em when I print em if anyone wants one

That’s it !!! I was able to pop it off obviously. Think I’m gonna scan it and 3D print it with PETG. Then pop it back on. Hopefully

Nothing on the internet shows that code or p/n

Pictures of the passenger side that isn’t snapped off

It was mounted to the bracket direct to the track

It was attached directly to the track. I tried all the numbers in the book, plus checked all the diagrams. The same 3 roller part comes up

This was broken on my rear 1/4 window track keeping it from going up and down correctly. Checked parts catalog and can’t find it at all. All I can find is 23-64-269.

There’s no way to be able to pull them into the padding? I think I read somewhere that someone epoxied small screws to the broken pieces, but not sure