Search results for query: *

On the 67 Fury, the front hanger bracket for the leaf springs - are the nuts meant to be torqued to 30 ft-lb? The FSM is a bit confusing on that. I tried to torque it up to 30 and snapped a stud... I just got a similar nut and bolt as a substitute but I got paranoid of snapping all four so I...

Anyone try 13/16 wheel cylinders on the rear wheels after converting to front disc brakes? I see quite a few people have done it on the A and B bodies with great success, but haven't really heard much about that being done to C bodies. Would it be better going to 7/8 cylinders?

Are the camber bolts not meant to slide in easily through new upper control arm bushings? It seems to not fit through the eye without serious hammering and I'm concerned that it's going to be an absolute pain to take out later on if I hammered it in all the way.

Just an info dump thread for anyone else with these year model RHD barges. Not too many pictures unfortunately, my hands were absolutely filthy to the point that someone could accuse me of trying to do blackface, if it were on my face. Tools/sockets needed: - 19mm or 3/4 inch socket - 16mm or...

Unlikely that I'm going to be able to get a set of PST brackets as they appear to be no longer in production, so have settled for trying to improve the OE brackets to make them serviceable. The bushing kit I got off rockauto, K7061: has two nuts and bolts for what I can only assume is meant for...

Posting this because facebook groups suck for information retention and searchability, this thread should hopefully show up when the google spider does its thing. Mainly for aussie 65-68 dodge phoenix owners although it might apply to other years too. As you guys are probably aware, the inner...

Couldn't find anything in the FSM about removing wheel studs from drums...could find the procedure about disc brakes though. Is it possible to remove just the wheel studs from the rear left drum and press/hammer in new ones? I do not care for left-hand threads and want to replace them with...

Alrighty, going to try to tackle this one. Practically everything that's rubber and mounted to the stub frame in some way are shot. Main questions I have are, does anyone make poly bushings for the sway bar-strut rod connecting brackets? I'm not going to install poly anywhere else, except maybe...