Search results for query: *

The NSS on my wagon has been acting up, and I finally had to resort to grounding it out, which of course is not the safest thing. I sourced a correct NOS replacement (it was actually kind of hard to find), but I thought I'd ask a few questions here before I go ahead and swap it out. 1) It...

Hey All, I recently got a really decent deal on a Purple cam - according to the guy I bought it from, it's part # P5007 697 It has these numbers on the shank: I think it says 1103 I've been able to find out that this cam apparently has the following specs, but I could be wrong. Can anyone...

71 Fury clutch and brake pedal setup. I don't know why I can't share the FB link to the actual ad, but the seller is named Dodge Stokes. Facebook He's got these parts listed on C Body Owners and Fanatics.

Hi everyone, I have a 1966 issue 440 for which I will require replacement pistons. I am going to sleeve the block back to original bore. I will be using reconditioned 516 heads as they are what came on the engine originally. I have a chance to buy a set of used original factory 440 pistons...

Hey Everyone, As some of you know, I refurbish first generation Auto Pilot systems - rebuilding the dash dial controls, and refurbing the under hood mechanical servos, and renewing all the other components (bracketry, Bowden cable, wire harness, throttle linkages etc.). This is the...

NOT MINE... Facebook post, from Quebec Canada. Aftermarket Poly 3x2 intake. I can't post pics from my phone, will do later when I get to my desktop.

@SGT FURY - sent you a PM, but it might not have sent you an email notification due to issues with that. Check your PMs for one from me. Thanks! :)

Question - I have a set of 516 heads ('66 440), that need rebuilding. Are the rockers and shaft assemblies from non-516 casting heads interchangeable? Someone is selling a set from a 383 that look identical in the picture, but the seller isn't revealing what head casting they came off...

Helloe FCBO hive mind! Standard first gen 440 (1966), stock pistons etc. What is the length of a wrist pin? What is the outer measurement between the two flat spots on the piston skirt where the pin presses in? How much space between the cylinder wall and the pin bosses (flat skirt...

OK FCBO hive mind - I need to source a power steering leak. It leaks down onto the floor, but it's hard to pinpoint where exactly it's coming from. So, my first steps are to start by cleaning the years of crud and grease off my lower engine, steering pump, steering box and steering gear...

Do early 516 heads have casting/date codes? What about water pump housings? I have a line on a very early casting 440 (June of 65) Want to know if the heads and waterpump housing have dating of any sort... Thanks in advance.

Lookie what I got back from the plater's yesterday... going on the 66 4 speed Monaco. Yippie!! With my nice engine call out decal (440 FOUR BARREL) it will look splendid on my engine. I have a black one with the same call out decal which I restored as well... this way I have options...

Engine is supposed to be a 440. Casting date on the block says 1•24•65 Real or bogus? Jan 25, 1965, or does it translate to something different, like shift week month which would make it 1st shift 2nd week of April 65. Thoughts please?