WANTED 1966 Fury Hood Mounted Turn Signals

Status
Not open for further replies.

Brad Nelson

Member
Joined
Jun 15, 2018
Messages
69
Reaction score
106
Location
Gig Harbor, WA
Feedback: 0 / 0 / 0
Contact seller
While working on cleaning things up, I tried to take apart the hood mounted turn signals.
As you can see things didn't go so well.
I'm in need of 1 complete hood turn signal but will happily buy a set.
Picture for reference.
TIA

20230227_145339.jpg
 
The lens isn't as much of a problem as the rust that has eaten the base and frozen the threaded the light bulb socket to the point it's nearly wrecked trying to get it apart.
 
soak the base in vinegar, mod podge to glue the lens together. then dip it in future floor polish. works great
 
You can actually glue those back together - as long as the glue is clear, it still works! Been there done that!
On my 67, both lenses and bases fell into a pile on my workbench. Took a few hours to piece back together with superglue, then when assembled I dipped in epoxy and let it set, then sanded down the outsides so it would fit back into the housing, polished the exposed lens and "Bam" good as can be. The prices of the 67 turn signals and lenses made me get REALLY creative.
 
Status
Not open for further replies.
Back
Top