Stormrider
Member
Gentlemen, as a novice I am looking for advice,
Trying to figure out which head gasket to use, the stock .020 steel or the .040 Fel Pro comp
The pistons are TRW 2315f -30 and are .005 down, (that’s the closest one to the top) with stock 906 heads and a mild cam -
INT. 0 TDC 34 ABC 214 32 BTC 76 ATC 288 .295 .443 107 HYD.
EXH. 49 BBC 5 BTC 224 81 BBC 37 ATC 298 .310 .465 117 HYD.
I don’t know, if the steel gasket is an option that puts my clearance at 0.025 and what happens to the quench with open heads? I know the steel gasket would raise compression but is it too close?
Trying to figure out which head gasket to use, the stock .020 steel or the .040 Fel Pro comp
The pistons are TRW 2315f -30 and are .005 down, (that’s the closest one to the top) with stock 906 heads and a mild cam -
INT. 0 TDC 34 ABC 214 32 BTC 76 ATC 288 .295 .443 107 HYD.
EXH. 49 BBC 5 BTC 224 81 BBC 37 ATC 298 .310 .465 117 HYD.
I don’t know, if the steel gasket is an option that puts my clearance at 0.025 and what happens to the quench with open heads? I know the steel gasket would raise compression but is it too close?