For Sale '57-'59 Power Windows plastic connectors

Status
Not open for further replies.

Chrome58

Active Member
Joined
Oct 4, 2017
Messages
406
Reaction score
339
Location
Belgium
Feedback: 0 / 0 / 0
Contact seller
Hello,

I am reproducing the plastic connectors for Power Window switches through 3D printing, using a method known as Selective Laser Sintering. The parts are made of polyamide (PA 2200) and are very accurate, identical to the original ones. The prices are :

Master switch : $33.00
Single switch : $9.00

Shipping is $8.00 worldwide (up to 2 master and 6 single switches), with tracking information provided.

I have made some research concerning the interchangeability of those parts, using the '55-'58, '59, '60 and '61 parts catalogs. Those parts are known under references 1779276 (master) and 1779268 (single), but only for the '57-'58 cars. Most probably, they were only serviced (and therefore referenced) during those years and they were included with the wiring or the switches after that. Based on the references of the switches and the wiring, I was able to cross-reference some of their use.

I may be missing some applications, but here's what I've been able to gather so far:

Master switch connector
Electric Window Lift
1957 All - 1 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
1958 All - 1 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
1959 All - 1 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial

Single switch connector
Electric Window Lift
1957 All - 3 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
1958 All - 3 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial
1959 All - 3 per car - Plymouth, Dodge, DeSoto, Chrysler, Imperial

Electric Door Lock
1958 All - 2 per car - Imperial
1959 All - 2 per car - Imperial

Electric Seat Adjuster
1957 All - 1 per car - Plymouth
1958 All - 1 per car - Plymouth
1959 All - 1 per car - Plymouth

Tailgate Electric Window Lift
1957 Sub. - 1 per car - Plymouth, Dodge, DeSoto, Chrysler
1958 Sub. - 1 per car - Plymouth, Dodge, DeSoto, Chrysler
1959 Sub. - 1 per car - Plymouth, Dodge, DeSoto, Chrysler


I manufacture them by batch, so there may be some delay when ordering, if I have to launch a new one. If you are interested, please let me know in this thread, write me a PM or an e-mail at "powerwindows at orange.fr"

Thank you.

DSC02189.JPG
DSC02193.JPG
DSC02191.JPG
 
Hi everyone,

I've got the equivalent 6 sets left in stock.
I probably won't make a new batch before a long time.

So if you are interested by a set, or individual connectors, please let me know.

Thanks.
 
Hi everyone,

I've got the equivalent 6 sets left in stock.
I probably won't make a new batch before a long time.

So if you are interested by a set, or individual connectors, please let me know.

Thanks.
Wanting to purchase a connector for the master switch. AUSSIE60SOTO.
 
Hello Aussie60Sotto,

Unfortunately, I'm sold out at the moment. And as you're the only one that's been interested for the past 6 months, I'm not in the position of launching the production of a new batch. Sorry.

I'll let you know if the situation changes.
 
Hello,

I'm launching the production of a new batch.
If you are interested, please e-mail me at "powerwindows [at] orange [dot] fr", or PM me.
 
Last edited:
Hello,

If you ever need a set, or just single ones, do not wait !
My current production batch is already 80% pre-sold, I have 4 sets left.
And I'm not sure when I'll do the next one ...
 
Status
Not open for further replies.
Back
Top