For Sale 65 New Yorker Parts

azblackhemi

Old Man with a Hat
Joined
Nov 13, 2010
Messages
7,178
Reaction score
9,448
Location
Waddell AZ
Someone should grab that Autopilot specific gas pedal mechanism - the pivot that pokes through the firewall has a special gasket unique to cars equipped with Autopilot.

That's something that is often overlooked when people are adding the option to their cars -

Thanks Ross! Yes it is hard to find but here it is! Complete with cable and good soft plyable boot. One mounting stud is broken but it will still mount tight. $35 plus shipping.
PXL_20211016_231255037.jpg
PXL_20211016_231320830.jpg
PXL_20211016_231333809.jpg
 

Omni

Member
Joined
Feb 24, 2021
Messages
149
Reaction score
132
Location
43567
Good Evening
Just to verify; Will the New Yorker grill assembly bolt up to a Newport?
Omni
 

FredNY66

Member
Joined
Mar 27, 2017
Messages
91
Reaction score
96
Location
Grenoble, France
A few pictures of the wonderful world of clips and fasteners :) ... Wondering whether #2 and #3 below are the same (#3 are on the door, #2 are on the rear fenders). But the #2 are almost all gone, just found these remains behind the moulding. #1 is obviously broken too... I must say I was rather surprised by the lack of rust, despite the car's 26 years of Michigan life. #6 and #7 are probably universal replacement parts.

ClipCollection.jpg


BasDeCaisse.jpg


BasDePorte.jpg
 

azblackhemi

Old Man with a Hat
Joined
Nov 13, 2010
Messages
7,178
Reaction score
9,448
Location
Waddell AZ
A few pictures of the wonderful world of clips and fasteners :) ... Wondering whether #2 and #3 below are the same (#3 are on the door, #2 are on the rear fenders). But the #2 are almost all gone, just found these remains behind the moulding. #1 is obviously broken too... I must say I was rather surprised by the lack of rust, despite the car's 26 years of Michigan life. #6 and #7 are probably universal replacement parts.

View attachment 494304

View attachment 494305

View attachment 494306

So far I haven't had much luck with any plastic clips. I will try and remove the rest and see what happens.
 

FredNY66

Member
Joined
Mar 27, 2017
Messages
91
Reaction score
96
Location
Grenoble, France
No worries. I think clip #5 can be easily replaced with universal ones (as long as diameter is ok). The "critical" ones are #3 and #1. As to #4, I think it's this one, but not 100% sure. Anyway, they are 55-56 years old... Probably very brittle.
 
Last edited:

azblackhemi

Old Man with a Hat
Joined
Nov 13, 2010
Messages
7,178
Reaction score
9,448
Location
Waddell AZ
No worries. I think clip #5 can be easily replaced with universal ones (as long as diameter is ok). The "critical" ones are #3 and #1. As to #4, I think it's this one, but not 100% sure. Anyway, they are 55-56 years old... Probably very brittle.

Ok Fred, here's what I could salvage so far. That's all for the quarter moldings but I can probably get more of the white plastic clips for the bottom of the doors but I'll have to drill out the screws.
PXL_20211029_002548510.jpg
PXL_20211029_003148175.jpg
 

1970cat

Senior Member
FCBO Gold Member
Joined
Dec 10, 2012
Messages
3,346
Reaction score
2,935
Location
central ny
#6 looks like the kind that is molded inside of rubber weatherstrip.
 

1970cat

Senior Member
FCBO Gold Member
Joined
Dec 10, 2012
Messages
3,346
Reaction score
2,935
Location
central ny
i think many of those are universal replacements . maybe you can find some replacements here:
Homepage
 

azblackhemi

Old Man with a Hat
Joined
Nov 13, 2010
Messages
7,178
Reaction score
9,448
Location
Waddell AZ
Car is gone but I still have a lot of good parts left. Grille assembly, dash, skirts, wheel covers and more.
ny1.jpg
rd1.jpg
ny2.jpg
65g2.jpg
sb1.jpg
 

wizard

Active Member
Joined
Mar 9, 2012
Messages
495
Reaction score
158
Location
Dillsburg, PA
I have a 68 Newport Convertable that I need floors for. Would anything from this car work/interchange? I also need front windshield. Would yours work? My lower qtrs need patching but I dont know if any of yours would be able to work on mine. Let me know

Wizard
 

azblackhemi

Old Man with a Hat
Joined
Nov 13, 2010
Messages
7,178
Reaction score
9,448
Location
Waddell AZ
I have a 68 Newport Convertable that I need floors for. Would anything from this car work/interchange? I also need front windshield. Would yours work? My lower qtrs need patching but I dont know if any of yours would be able to work on mine. Let me know

Wizard
Sorry the car is gone. Still have some parts left but no floor or glass.
 

Thomas Sabath

New Member
Joined
Apr 21, 2021
Messages
27
Reaction score
11
Location
Germany
Hi azblackhemi,

I“m in search of a straight, rust free bumper for my 1965 Chrysler 300.

The chrome should be good too.


Please pn me if you got one.

Thanks, Thomas
 

Thomas Sabath

New Member
Joined
Apr 21, 2021
Messages
27
Reaction score
11
Location
Germany
Thank you for the quick reply. If you hear anything, please think of me. Greeting Thomas from Germany
 

Steve300

New Member
Joined
Feb 8, 2021
Messages
5
Reaction score
2
Location
Von Ormy, TX
Dash parts. Speedometer cluster $30, am radio ( unknown if it works) $20. Ignition switch with key $25. Heater control, buttons all free but some vacuum ports broken. $25. All prices plus shipping.
View attachment 491462 View attachment 491463 View attachment 491464

Hi,

I would like to buy the Speedometer cluster and heater control (really only need the blend door "warmer>" knob, but will buy the whole deal). I may be interested in just the steering wheel too if you will sell it by itself. Thanks, Steve
 
Top