WANTED '66 Fury Sub Frame

[VIP]

Wanted to buy 1966 Fury III ( VIP ) sub frame, thanks

 

[C Body Bob]

I've got a 68 Fury III smallblock version here north of Raleigh, NC. You will have to pull it. If that will work for you

 

[jmopar360]

I have the side moulding for both sides of a vip.. Pretty decent shape, a couple pieces need some rework.. And maybe a few other odds and ends..and I know of a 65 fury in a junk yard close by Charlotte nc, I'm sure the sub frame is still decent.

 

[c300g]

there is a junkyard in south eastern ontario with a 65 sport fury. its picked clean but the front sub frame is still there and in reasonable shape.

 

[VIP]

there is a junkyard in south eastern ontario with a 65 sport fury. its picked clean but the front sub frame is still there and in reasonable shape.

Thanks for the response. I would like to get more info on the yard. It may sound good if you guys up there don't use salt , freely, on the roads in winter like here in western NY.

 

[VIP]

I've got a 68 Fury III small block version here north of Raleigh, NC. You will have to pull it. If that will work for you

thanks for the response, not sure about the engine mounts if anyone can help, I need it for a big block

 

[VIP]

I have the side moulding for both sides of a vip.. Pretty decent shape, a couple pieces need some rework.. And maybe a few other odds and ends..and I know of a 65 fury in a junk yard close by Charlotte nc, I'm sure the sub frame is still decent.

Thanks for the response. I would like more info on the yard if possible. Thanks to everyone for reading my post.

 

[c300g]

Thanks for the response. I would like to get more info on the yard. It may sound good if you guys up there don't use salt , freely, on the roads in winter like here in western NY.

we do use salt up here but i think this car came from a rural area. the car has been picked very clean. the floors, frame rails, front clip, interior, rear axle and much more have all been taken. i pulled the wheels off the car (see my sales posting) and they are very very clean.

my dad and i will be going back to the yard in the spring to get parts for his 64 dodge and my 65 plymouth. I can get photos for you if you like then.

the yard is called "the bone yard" in cardinal ontario, not far from the U.S boarder. the owner is very nice and his prices for the most part are fair. here is the website

Home

i bought tons of parts the day i went. 2 rims, 3 dog dish hubcaps, 2 arm rests, some trim, tons of screws and bolts, a few door lock buttons and a few vin & data tags. I only paid $90 cad for everything.

 

[C Body Bob]

thanks for the response, not sure about the engine mounts if anyone can help, I need it for a big block

Ok, mine won't work then

 

[fury fan]

Subframe for 65 C-bodies is different for the driverside motormount. It will fit your car, but you will need to use an engine with the correct bosses at the front near the PS pump. 383s have them, 413 and 426 have them, and cast-crank-era 440s have them.

There are some cantilevered adapter brackets available (somewhere?), but using a 66 frame would be better.
'66-73 C-Body Products