67 Fury tail light/trunk lid swap with 68 Fury

[TX67FURY]

I am considering converting a 1967 2 door hard top Fury Sport rear end (tail lights, extensions, trunk lid, and rear bumper) to a 1968. I don't have a 68 on hand to take measurements and wanted to know if it is even feasible as far as trunk lid dimensions, rear quarter panels from a 67 matching up to a 68 tail light extension, different bumper brackets, different trunk seal, etc (or anything else I don't realize at this time) without too much cutting/fabrication. Was wanting to look into the scope of the work that might be required before I think too much more about it. Much appreciated.

 

[commando1]

I'd say no... Thank you Google images.

 

[cbarge]

I say no as well.

 

[MrMoparCHP]

I say I need to see the structure behind the taillights, fillers extension and under the trunk lid.


Alan

 

[TX67FURY]

I say I need to see the structure behind the taillights, fillers extension and under the trunk lid.


Alan

That's what I was thinking. Was seeing if anyone had any experience with the 2.

 

[67-Fury]

Rear bumper and Brackets are Different. And trunk. It might be Do-able...who knows?

 

[Dick Singleton]

Anything is doable
BUT
There would be cutting and fabing
No strait bolt on
If you put the 2 side by side you would see
Now that being said
If you wanted to do quarter panels and all
It may be easier
And I would be interested in the 67 parts that come off