74-78 Sway (or Stabilizer) bar bushings P/N?

[commando1]

The bushings from RA are wrong. Look like they are for a Fiat.
I should have known. My fault. RA description say 3/" bars. Mine are 1".
The old ones had to be cut off so they're KAPUT.
Can't find P/N for the bushings in my parts manual. They don't even show it under SUSPENSIONS.

Mike, Bob, got a P/N for me??

Thanks.

 

[Kernel Sanders]

The sway bar bushings for a 1" bar are Moog K7096 if that helps

 

[commando1]

Just ordered the correct 1" bushings Moog 7096 from Energy Suspension Parts.
THANK YOU!!!!
I'm dead in the water until these show up. You saved my butt.

 

[Kernel Sanders]

Your quite welcome
I've been following your suspension rebuild thread as I will be doing it soon too though not on Cbody. They are all basically the same on mopars of the era and I'm reading everything I can so to be as prepaired for the 'fun' experience myself.

 

[1978 NYB]

Sorry Stan......found everything except the sway bar and related parts.

 

[commando1]

Sorry Stan......found everything except the sway bar and related parts.

You too, huh?? Weird...
Thanks anyway buddy. The above Moog part was what I ultimately was trying to find so it's a moot point now.

I love this forum...

< Sent from my tablet >

 

[commando1]

Your quite welcome
I've been following your suspension rebuild thread as I will be doing it soon too though not on Cbody. They are all basically the same on mopars of the era and I'm reading everything I can so to be as prepaired for the 'fun' experience myself.

The biggest thing I learned???? Just because the item description says it fits your car just isn't so too many times.
I wasted a few bucks. But Im saving over 12 hundred bucks on labor easy. Plus, I tracked down some parts a shop wouldn't have bothered to try.

< Sent from my tablet >

 

[1978 NYB]

The bushings from RA are wrong. Look like they are for a Fiat.
I should have known. My fault. RA description say 3/" bars. Mine are 1".
The old ones had to be cut off so they're KAPUT.
Can't find P/N for the bushings in my parts manual. They don't even show it under SUSPENSIONS.

Mike, Bob, got a P/N for me??

Thanks.

It should of been in Group 2 - Suspension. Everything is there except the sway bar for a "C". I looked in Steering and Frame Groups......nothing.

Mike, did you find the sway bar for a "C"??? Page # if you did.