SOLD A/C brackets.

[bluefury361]

Here's a link to a ebay site that has all the A/C brackets I need for the 69 Fury 318. A little more then I was hoping to pay but I may go for them.
Does anyone have any of these brackets....? The only one I have is the one that bolts to the pass cyl head.

Of course ...... If someone would just buy them and have them dropped shipped to me........ I'd be very appreciative.

Will.

http://www.ebay.com/itm/171588241804?_trksid=p2060778.m1438.l2649&ssPageName=STRK:MEBIDX:IT

 

[68plymouth383]

For a little over 100 shipped......... That's not a bad deal..........

 

[thrashingcows]

I'm pretty sure the 318 with AC in my 70 SF did not have ay idler pullies. It was just two belts around the crank, the alternator, and then the AC compressor. The PS ran it's own belt.

 

[bluefury361]

I'm pretty sure the 318 with AC in my 70 SF did not have ay idler pullies. It was just two belts around the crank, the alternator, and then the AC compressor. The PS ran it's own belt.

The compressor on my 69 used only one drive belt and it did not include the alternator. I'm nor sure why there were different drive systems, unless it was for auto air.

 

[tallhair]

Are you sure the pulley's weren't changed when they removed the A/C will?

 

[MrMoparCHP]

The Factory Service Manual has diagrams showing the setup for the different engines combinations in the different cars.

And it may be different for different years.


Alan

 

[thrashingcows]

Are you sure the pulley's weren't changed when they removed the A/C will?

That's what I'm thinking. You have a 3 groove crank pulley. I bet the PS was changed, the water pump pulley, and alternator as well.

 

[bluefury361]

The Factory Service Manual has diagrams showing the setup for the different engines combinations in the different cars.

And it may be different for different years.

I checked my 69 FSM and it shows a single drive belt system for the Fury w/318. The alternator does not share a drive belt with the A/C. That's why the idlers are there.

I'm not sure all the parts in the ebay auction are a set. I'd really like to see some detail shots of a complete and intact system.

 

[68plymouth383]

 

[68plymouth383]

These are the best pics I have. All from orig 68 318's with factory ac. All parts are gone now. Pics for reference.

 

[70bigblockdodge]

Will here are some small block a/c brackets that I have from 70 up car they are yours if you want them.

 

[bluefury361]

These are the best pics I have. All from orig 68 318's with factory ac. All parts are gone now. Pics for reference.

That is the system that my Fury has. Very helpful....... Thanks for posting these.

Will.

 

[bluefury361]

View attachment 42649View attachment 42650View attachment 42651

Will here are some small block a/c brackets that I have from 70 up car they are yours if you want them.

I really appreciate the offer. My car is an early build, (Sept 68), which may be why the system is like the 68 models. It's starting to look like the dual belt system was installed on the later 69 models and would use the brackets you have....
I'm trying to verify that and will get back to you if I can use them.

Will.

 

[70bigblockdodge]

They have been hanging on the wall about 3 years, here if you need them.